error Stopped driver for port "br2"

p21 — Sun, 04 Jul 2021 15:40:01 GMT

After the 350 bring up fro 37 days I got this error and the likk drobbed. I rebooted the remote (client) and it came back. It worked for a few hours and gave me the same error again (extract from log below)

I am using 340 in bridge mode (v11.07)

2003/04/28 16:15:00 (Info): Station [BR350-51fee6]00409651fee6 Associated

2003/04/28 16:15:00 (Info): Station [BR350-51fee6]00409651fee6 Authenticated

2003/04/28 16:14:59 (Info): Station [BR350-51fee6]00409651fee6 Associated

2003/04/28 16:14:59 (Info): Station [BR350-51fee6]00409651fee6 Authenticated

2003/04/28 16:14:55 (Info): Station [BR350-51fee6]00409651fee6 Associated

2003/04/28 16:14:55 (Info): Started driver for port "br2"

2003/04/28 16:14:55 (Info): Station [BR350-51fee6]00409651fee6 Authenticated

2003/04/28 14:15:36 (Info): Station [BR350-51fee6]00409651fee6 roamed

2003/04/28 14:15:36 (Info): Stopped driver for port "br2"

2003/04/28 11:02:37 (Info): Station [BR350-51fee6]00409651fee6 Associated

2003/04/28 11:02:37 (Info): Station [BR350-51fee6]00409651fee6 Authenticated

2003/04/28 11:02:32 (Info): Station [BR350-51fee6]00409651fee6 Associated

2003/04/28 11:02:32 (Info): Started driver for port "br2"

2003/04/28 11:02:32 (Info): Station [BR350-51fee6]00409651fee6 Authenticated

2003/04/25 13:48:43 (Info): Station [BR350-51fee6]00409651fee6 roamed

2003/04/25 13:48:43 (Info): Stopped driver for port "br2"

Re: error Stopped driver for port "br2"

Fri, 02 May 2003 14:45:58 GMT

This might be because of radio firmware is corrupted. In this case you have to to reset the unit to factory defaults . See the following document for more details:

http://www.cisco.com/en/US/products/hw/wireless/ps458/prod_release_note09186a00800b013f.html#28936

topic Re: error Stopped driver for port "br2" in Wireless

error Stopped driver for port "br2"

Re: error Stopped driver for port "br2"