https://community.cisco.com/t5/wireless/circular-shape-problem-on-prime-1-4/m-p/2560713#M1956 <P>check "Guidelines for Inclusion and Exclusion Areas on a Floor" from,</P><P>http://www.cisco.com/c/en/us/td/docs/wireless/prime_infrastructure/1-4/configuration/guide/pi_14_cg/maps.html#pgfId-1671523</P> Wed, 10 Dec 2014 01:23:51 GMT Saurav Lodh 2014-12-10T01:23:51Z https://community.cisco.com/t5/wireless/circular-shape-problem-on-prime-1-4/m-p/2560712#M1955 <P>Dears,</P><P>&nbsp;</P><P>I created site map on PI 1.4 and added AP on this map but actually the coverage area it seem horizontal lines not circular shape i edit more than one time in Azimuth and Elevation but the AP still seems as horizontal line how come i get circular shape for AP coverage area.</P><P>PI 1.4 &amp; AP Model 2602I</P><P>&nbsp;</P><P>Wait your feedback ASAP.</P><P>&nbsp;</P><P>Regards,</P> Mon, 05 Jul 2021 09:06:10 GMT https://community.cisco.com/t5/wireless/circular-shape-problem-on-prime-1-4/m-p/2560712#M1955 Ahmed Ayaad 2021-07-05T09:06:10Z https://community.cisco.com/t5/wireless/circular-shape-problem-on-prime-1-4/m-p/2560713#M1956 <P>check "Guidelines for Inclusion and Exclusion Areas on a Floor" from,</P><P>http://www.cisco.com/c/en/us/td/docs/wireless/prime_infrastructure/1-4/configuration/guide/pi_14_cg/maps.html#pgfId-1671523</P> Wed, 10 Dec 2014 01:23:51 GMT https://community.cisco.com/t5/wireless/circular-shape-problem-on-prime-1-4/m-p/2560713#M1956 Saurav Lodh 2014-12-10T01:23:51Z