topic Re: br350 point-multipoint - video application in Wireless https://community.cisco.com/t5/wireless/br350-point-multipoint-video-application/m-p/24472#M195780 <HTML><HEAD></HEAD><BODY><P>Have your Cisco design engineer (SE) put this together. </P></BODY></HTML> Fri, 04 Jan 2002 15:19:33 GMT mmellet 2002-01-04T15:19:33Z br350 point-multipoint - video application https://community.cisco.com/t5/wireless/br350-point-multipoint-video-application/m-p/24471#M195779 <P>any possibility using the br350 in a point to multi-point application? if so do you any recommendations, successes or failures? </P><P>Here's the situation - I'm looking at connecting 8 remote sites, ranging from .5 miles - 4 miles back to a HQ (headqarters). Each remote site will be transmitting only video (30 frames per second from a singal camera). 4 sites are located north of HQ (will have overlapping signals) and 4 sites south of HQ (with overlapping signals.) currently planning on br350 at each remote site and 8 br350 at HQ with 8 antennas. But wondering if there is an alternate solution at HQ to reducing the number of antennas and br350. (possibly 2 antennas/ bridge for Point-multipoint-but what will it do to the video quality?). I do realize I will have the problem of overlapping signals. </P><P>The UBR72xx is way too expensive!!!!</P> Mon, 05 Jul 2021 05:55:09 GMT https://community.cisco.com/t5/wireless/br350-point-multipoint-video-application/m-p/24471#M195779 wams01 2021-07-05T05:55:09Z Re: br350 point-multipoint - video application https://community.cisco.com/t5/wireless/br350-point-multipoint-video-application/m-p/24472#M195780 <HTML><HEAD></HEAD><BODY><P>Have your Cisco design engineer (SE) put this together. </P></BODY></HTML> Fri, 04 Jan 2002 15:19:33 GMT https://community.cisco.com/t5/wireless/br350-point-multipoint-video-application/m-p/24472#M195780 mmellet 2002-01-04T15:19:33Z