1142 and 2602 to join 3802 ME controller

bikoo106 — Mon, 05 Jul 2021 19:35:51 GMT

Hello everyone,

i would like to know if it's possible for 1142 and 2602i to join 3802i ME controller,
I’m able to join the WLC using 2702i
but the 2602i and 1142 is not joining even after i update the FW for both to the latest one from Cisco.
i assigned IP and GW using capwap ap ip address command but still getting the below error

_______________________________________________________________
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)31.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.10.10.2 peer_port: 5246
*Oct 2 18:08:31.243: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.10.10.2 peer_port: 5246
*Oct 2 18:08:31.243: %CAPWAP-5-SENDJOIN: sending Join Request to 10.10.10.2
*Oct 2 18:08:31.247: %DTLS-5-ALERT: Received WARNING : Close notify alert from 10.10.10.2
*Oct 2 18:08:31.243: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.10.10.2 peer_port: 5246
*Oct 2 18:08:31.243: %CAPWAP-5-SENDJOIN: sending Join Request to 10.10.10.2
*Oct 2 18:08:31.247: %DTLS-5-ALERT: Received WARNING : Close notify alert from 10.10.10.2
*Oct 2 18:08:31.247: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.10.10.2:5246

______________________________________________________________

the 3802 ME IP is 10.10.10.2 and there's no DHCP configured, the 2702i joined very smoothly without any problem

thanks.

Re: 1142 and 2602 to join 3802 ME controller

bikoo106 — Sat, 03 Oct 2020 07:59:27 GMT

is anyone here can help me please

Re: 1142 and 2602 to join 3802 ME controller

Mark Elsen — Sat, 03 Oct 2020 09:55:07 GMT

- Check if all compatibility-parameters concerning ap-models + controller and software versions are fulfilled using the info's below :

https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html#pgfId-393660

Re: 1142 and 2602 to join 3802 ME controller

Rich R — Sat, 03 Oct 2020 14:35:35 GMT

M's answer is correct - short answer is NO, those old APs are not supported by the latest release, and haven't been for some time.

topic 1142 and 2602 to join 3802 ME controller in Wireless

1142 and 2602 to join 3802 ME controller

Re: 1142 and 2602 to join 3802 ME controller

Re: 1142 and 2602 to join 3802 ME controller

Re: 1142 and 2602 to join 3802 ME controller