topic Re: AP issue in Wireless

AP issue

mzedanmzedan — Mon, 05 Jul 2021 19:33:05 GMT

Hi Dears,

I have a problem with AP Air-CAP2602e-e-K9

I can't access it via console, and these symbols are appearing.

Kindly note that the AP is in standalone mode.

Scott Fella — Wed, 23 Sep 2020 14:06:02 GMT

If your baud rate is set to 9600 8N1, then it looks like that so was flashed somehow and no way to recover that.

mzedanmzedan — Thu, 24 Sep 2020 10:01:28 GMT

Dear Scoot,

Thanks for your reply.

Exactly, I had set the settings to 9600, 8N1

Do you mean that AP is not available to use again?

Sandeep Choudhary — Thu, 24 Sep 2020 10:15:02 GMT

Hi,

make sure your flow control is set to none. Swithces and routers allow it to be RTS/CTS, but the AP needs flow control to be off.

and please also try with some other console cables(USB-->rs232).

Regards

Dontf orget to rate helpful posts