topic Re: Cisco wlc query in Wireless

Cisco wlc query

BhaskarDS — Mon, 05 Jul 2021 19:29:55 GMT

Where to find the location of config and boot file of Cisco WLC? The location I mean directory location.

Re: Cisco wlc query

Sandeep Choudhary — Thu, 10 Sep 2020 10:57:34 GMT

Dont know about any directory but Controllers contain two kinds of memory: volatile RAM and NVRAM. At any time, you can save the configuration changes from active volatile RAM to non-volatile RAM (NVRAM) using one of these commands:

save config—Saves the configuration from volatile RAM to NVRAM without resetting the controller.

Regards

Dont forget to rate helpful posts

Re: Cisco wlc query

Rasika Nayanajith — Thu, 10 Sep 2020 13:11:07 GMT

Hi Bhaskar,

test system dir <path> command may help. Have a look below thread

https://community.cisco.com/t5/wireless-and-mobility/what-command-can-show-image-and-space-info-in-wlc5500/td-p/3326192

Rasika

*** Pls rate all useful responses ***