https://community.cisco.com/t5/wireless/ibns-web-based-authentication-https-intercept/m-p/1432701#M19787 <P><SPAN>Hi everybody,</SPAN></P><P></P><P>Hopefully this is an easy question.</P><P>I have configured an IBNS setup with Wired Web-Authentication. To sum this up: connect a computer to the switch, go to a web page, the switch intercepts the http request, sends you a log-in page, you log in and get directed to the original web page.</P><P>For this, I have used the following guide <A href="http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6638/app_note_c27-577494.html" target="_blank">http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6638/app_note_c27-577494.html</A></P><P></P><P>Before I implemented this, I had the HTTP and HTTPS server on the switch disabled. But if I disable the HTTP serer (and leave the HTTPS server enabled), the switch doesn't intercept the web pages anymore. Is there a way to use web-based authentication without using the HTTP server and using only the HTTPS server on the switch?</P><P></P><P>Hope someone can help me with this.</P><P></P><P>Thanks</P><P></P><P>Ian</P> Sun, 04 Jul 2021 01:49:08 GMT ihornes123 2021-07-04T01:49:08Z https://community.cisco.com/t5/wireless/ibns-web-based-authentication-https-intercept/m-p/1432701#M19787 <P><SPAN>Hi everybody,</SPAN></P><P></P><P>Hopefully this is an easy question.</P><P>I have configured an IBNS setup with Wired Web-Authentication. To sum this up: connect a computer to the switch, go to a web page, the switch intercepts the http request, sends you a log-in page, you log in and get directed to the original web page.</P><P>For this, I have used the following guide <A href="http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6638/app_note_c27-577494.html" target="_blank">http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6638/app_note_c27-577494.html</A></P><P></P><P>Before I implemented this, I had the HTTP and HTTPS server on the switch disabled. But if I disable the HTTP serer (and leave the HTTPS server enabled), the switch doesn't intercept the web pages anymore. Is there a way to use web-based authentication without using the HTTP server and using only the HTTPS server on the switch?</P><P></P><P>Hope someone can help me with this.</P><P></P><P>Thanks</P><P></P><P>Ian</P> Sun, 04 Jul 2021 01:49:08 GMT https://community.cisco.com/t5/wireless/ibns-web-based-authentication-https-intercept/m-p/1432701#M19787 ihornes123 2021-07-04T01:49:08Z