https://community.cisco.com/t5/wireless/how-does-channel-assignment-work-when-doing-flex-and-bridge-mode/m-p/4084036#M198933 <P>Hi All</P><P>how does channel assignment work when doing flex and bridge mode? does it use the same radio and channel for both the backhaul bridge connection as it does to serve the clients but just separates the airtime between the clients and backhaul?</P><P>cheers</P> Mon, 05 Jul 2021 19:02:46 GMT carl_townshend 2021-07-05T19:02:46Z https://community.cisco.com/t5/wireless/how-does-channel-assignment-work-when-doing-flex-and-bridge-mode/m-p/4084036#M198933 <P>Hi All</P><P>how does channel assignment work when doing flex and bridge mode? does it use the same radio and channel for both the backhaul bridge connection as it does to serve the clients but just separates the airtime between the clients and backhaul?</P><P>cheers</P> Mon, 05 Jul 2021 19:02:46 GMT https://community.cisco.com/t5/wireless/how-does-channel-assignment-work-when-doing-flex-and-bridge-mode/m-p/4084036#M198933 carl_townshend 2021-07-05T19:02:46Z https://community.cisco.com/t5/wireless/how-does-channel-assignment-work-when-doing-flex-and-bridge-mode/m-p/4084052#M198934 <P>Hello,</P> <P>&nbsp;</P> <P>Yes, if you have enable allow clients on backhaul then AP will allow client connection on the same radio as the one it uses for backhaul. This configuration is disable by default.&nbsp;</P> Tue, 12 May 2020 12:41:16 GMT https://community.cisco.com/t5/wireless/how-does-channel-assignment-work-when-doing-flex-and-bridge-mode/m-p/4084052#M198934 Rafael E 2020-05-12T12:41:16Z