topic Re: 1142N Automonouse mode - Webauth Passthrough will not connect in Wireless

1142N Automonouse mode - Webauth Passthrough will not connect

Michael Durham — Mon, 05 Jul 2021 18:48:57 GMT

I configured web passthrough as the docs show and I do get the splash screen with most of my agreement (see pict). But, when I click accept, a screen pops up then another accept screen loads. Config file attached.

If I get this working, I want to customize these pages.

Running IOS 15.2 on the AP

Re: 1142N Automonouse mode - Webauth Passthrough will not connect

Cristian Matei — Wed, 04 Mar 2020 18:49:43 GMT

Hi,

What you see in the second screen is normal, as the browser doesn't trust the self-signed certificate.

Regards,

Cristian Matei.

Re: 1142N Automonouse mode - Webauth Passthrough will not connect

Michael Durham — Thu, 05 Mar 2020 13:55:08 GMT

So how do I fix this so that ANY browser will work and the guests get access to the network?

Re: 1142N Automonouse mode - Webauth Passthrough will not connect

Cristian Matei — Thu, 05 Mar 2020 14:39:21 GMT

Hi,

Import a certificate which is issued by a public CA, that all browsers and operating systems have in their trusted zone. You could use https://letsencrypt.org

Regards,

Cristian Matei.

Re: 1142N Automonouse mode - Webauth Passthrough will not connect

Michael Durham — Thu, 05 Mar 2020 15:04:27 GMT

Thank you.

Is thee a post/blog that explains ACME Client to use, which software and OS to select and finally, how to install the cert?

I have never worked with that part of things.