topic Re: C9800 - WebUI preview CLI commands before applied in Wireless

C9800 - WebUI preview CLI commands before applied

Martin Jelinek — Mon, 05 Jul 2021 18:48:47 GMT

Hi all,

Does anyone know if there is a plan for Catalyst 9800 wireless controllers running on IOS-XE to add a feature into WebUI to kind of "preview commands" before they are applied into the device?

Kind of something possible by Cisco ASDM (ASA firewall management GUI interface).

So basically I believe it would be nice to get CLI output (preview of all commands to be applied once something is configured in GUI) for future reference or future re-use on the additional C9800 instance.

Though it is not possible now or I haven't seen it.

Just wondering if anyone knows about it or not. Kind of very nice to have feature 🙂

Thanks,

Martin

Re: C9800 - WebUI preview CLI commands before applied

Cristian Matei — Wed, 04 Mar 2020 09:17:52 GMT

Hi,

This "feature" has never been in the WLC GUI, and never seen it in Cisco Road Maps, most probably not enough clients have requested this. Maybe with SD and orchestration, it will come.

Regards,

Cristian Matei.

Re: C9800 - WebUI preview CLI commands before applied

Martin Jelinek — Wed, 04 Mar 2020 14:47:39 GMT

Hi Cristian,

I know it doesn't exists with AirOS (WLC) - which were even though a bit difficult to cope with in CLI, but IOS-XE is quite nice with structured sections where I would gladly see such feature, so you can easily copy/paste part of the configs like changes in WLANs and policies etc. to other systems if needed.

Since from WebUI you can't just export defined policy or selected policy/settings to import it to other C9800 instance, but maybe something like this will appear in future...

Was wondering if anyone knows about such feature or not.

Thank you

Martin

Re: C9800 - WebUI preview CLI commands before applied

patoberli — Wed, 04 Mar 2020 14:56:28 GMT

Cisco Prime Infrastructure would offer you this, if you work with templates 😉
But no, never heard of this, nor do I expect this to come (as you need to click on Apply to apply something).

Re: C9800 - WebUI preview CLI commands before applied

Scott Fella — Wed, 04 Mar 2020 15:01:02 GMT

I too agree this will not happen. What you can do is apply the configuration via the WebUI and then on the “save”, click on “diff”. That will show you what has changed and you can use that for reference.

Re: C9800 - WebUI preview CLI commands before applied

Martin Jelinek — Thu, 05 Mar 2020 13:57:24 GMT

Thanks, yeah DIFF is nice one, just still not that easily used as preview as someone might be used from ASDM.

Just tried to ask if someone is aware or know something more. I see that as nice to have, as it might get life easier from administrators having more C9800 instances.

Thank you for your thoughts!

Martin