https://community.cisco.com/t5/wireless/wlc-filters/m-p/4039270#M199870 Which that many clients, you are better off running the commands off the cli. Or if you have Prime, you can run reports. <BR /> Tue, 03 Mar 2020 13:23:33 GMT Scott Fella 2020-03-03T13:23:33Z https://community.cisco.com/t5/wireless/wlc-filters/m-p/4039159#M199869 <P>Hi all.</P><P>&nbsp;</P><P>I need some advice here.</P><P>&nbsp;</P><P>I have a 5508 WLC running 8.5.140.0 and is experiencing the following:</P><P>&nbsp;</P><UL><LI>When I click on clients, I see a total of 4450 clients connected,</LI><LI>Then I use the Filter, to search clients <EM><STRONG>by Protocol</STRONG></EM></LI><LI>I then take down the number of clients in each of the 7 Protocol options.</LI><LI>When I add all the clients together, I only get to a total of 2227 clients</LI></UL><P>Am I Missing something here ?&nbsp;&nbsp; Where is the rest of the clients ?</P><P>&nbsp;</P><P>Thank You</P><P>&nbsp;</P><P>&nbsp;</P> Mon, 05 Jul 2021 18:48:00 GMT https://community.cisco.com/t5/wireless/wlc-filters/m-p/4039159#M199869 jacovr 2021-07-05T18:48:00Z https://community.cisco.com/t5/wireless/wlc-filters/m-p/4039270#M199870 Which that many clients, you are better off running the commands off the cli. Or if you have Prime, you can run reports. <BR /> Tue, 03 Mar 2020 13:23:33 GMT https://community.cisco.com/t5/wireless/wlc-filters/m-p/4039270#M199870 Scott Fella 2020-03-03T13:23:33Z https://community.cisco.com/t5/wireless/wlc-filters/m-p/4039273#M199871 Search for “Cisco wlc L3 roaming” you will find information regarding the various types of roaming.<BR /><BR /><A href="https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-3/config-guide/b_cg83/b_cg83_chapter_010011.html" target="_blank">https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-3/config-guide/b_cg83/b_cg83_chapter_010011.html</A><BR /> Tue, 03 Mar 2020 13:28:33 GMT https://community.cisco.com/t5/wireless/wlc-filters/m-p/4039273#M199871 Scott Fella 2020-03-03T13:28:33Z