topic Re: WAP125 2.4Ghz WiFi disappears, CPU is pegged at 100% in Wireless

WAP125 2.4Ghz WiFi disappears, CPU is pegged at 100%

nielson@ldschurch.org — Mon, 05 Jul 2021 18:34:15 GMT

This is a new WAP125 I recently purchased. I'm having trouble with the 2.4Ghz wireless disappearing. 5G still works. The wifi analyzer on my phone shows it is gone and devices can't connect. Rebooting fixes the problem until it happens 2 days later.

In the web interface I notice the CPU utilization is stuck at 100%.

Firmware version is 1.0.2.0

Re: WAP125 2.4Ghz WiFi disappears, CPU is pegged at 100%

Mark Elsen — Tue, 21 Jan 2020 06:24:20 GMT

- Use a syslog server with debugging level set on the AP , scrutinize syslog messages received from the AP, during the disappearing time-periods, check for errors etc.

https://www.cisco.com/c/en/us/support/docs/smb/wireless/cisco-small-business-100-series-wireless-access-points/smb5592-configure-the-remote-log-settings-on-the-wap125-and-wap581.html