AP 1562E joins WLC 3504, SSID is broadcasted, assign static IP for the network, but cannot gain access to network

HunterMathews2967 — Mon, 05 Jul 2021 18:25:21 GMT

Network that I am trying to access is 199.8.0.0/16 and is on VLAN 1

AP01 joins WLC-1 and begins broadcasting SSID "CISCO2_test". Created a vlan 1 interface:

Interface Name        Port Vlan Id IP Address Type Ap Mgr Guest
-------------------------------- ---- -------- --------------- ------- ------ -----
management            5    99         10.1.99.2 Static Yes No
redundancy-management 5    99         0.0.0.0 Static No No
redundancy-port       -    untagged   0.0.0.0 Static No No
plant network vlan    1    1          199.8.210.2 Dynamic No No
service-port          N/A N/A         192.168.1.1 Static No No
virtual               N/A N/A         1.1.1.1 Static No No

Switch port WLC is connected is trunked. Switch port AP01 is connected to is trunked.

Re: AP 1562E joins WLC 3504, SSID is broadcasted, assign static IP for the network, but cannot gain access to network

craig.beck — Wed, 18 Dec 2019 23:36:50 GMT

Have you set a native VLAN ID at the switchport where the WLC connects? If not it will be set to use VLAN 1, which will be untagged. The WLC has it tagged so it must match at both ends.

topic Re: AP 1562E joins WLC 3504, SSID is broadcasted, assign static IP for the network, but cannot gain access to network in Wireless

AP 1562E joins WLC 3504, SSID is broadcasted, assign static IP for the network, but cannot gain access to network

Re: AP 1562E joins WLC 3504, SSID is broadcasted, assign static IP for the network, but cannot gain access to network