topic Re: AP's disappear from controller in Wireless

AP's disappear from controller

crist — Mon, 05 Jul 2021 18:15:56 GMT

I'm the tech manager here at our high school.

We have a Cisco 5508 controller with 50 Aironet AP's

Windows 2019 DHCP server

12 of my AP's are not showing up within the controller. When I look at the any of the AP's they are a solid green...even after I reboot the AP

The AP Mac is showing in the cisco switch and all 50 have reservations within DHCP

I cannot PING any of the missing 12

I'm stumped....it appears the 12 AP's are indeed connecting to the LAN, but not getting an IP from the DHCP reservation

I rebooted the DHCP server and will reboot the controller later this afternoon.

Weird though.

Rasika Nayanajith — Thu, 07 Nov 2019 18:12:11 GMT

With "sh cdp nei detail" output can you verify what IP AP has got ?

Do you have console access to any of those AP, if so it is easier to see what's going on

HTH

Rasika

crist — Thu, 07 Nov 2019 18:45:53 GMT

So I found this out.....

Most of our AP's are AIR-CAP2702I-A-K9....all of those AP's are showing up

I had 12 Aironet LAP1142 (older models) also installed

ONLY the AIR-CAP2702I-A-K9 are now showing...none of the older models are showing up.

Rasika Nayanajith — Thu, 07 Nov 2019 19:52:18 GMT

What version of software you run on your 5508 ? 1142 last supported on 8.3.x release.

If software is compatible, I would check whether this cert expiry is related to your issue

HTH

Rasika

*** Pls rate all useful responses ***