https://community.cisco.com/t5/wireless/prime-infrastructure-2-1-deploy-wireless-template/m-p/2493004#M2018 <P>As a test, I set up a simple template to push to one access point.&nbsp; I am doing this in PI2.1.&nbsp; Every time I try to deploy the template, it fails.&nbsp; I cant figure out why.&nbsp; So I am attaching a screenshot of the error and hope that some one else knows how to correct this issue.&nbsp; TIA!</P> Mon, 05 Jul 2021 08:28:50 GMT bm_5789 2021-07-05T08:28:50Z https://community.cisco.com/t5/wireless/prime-infrastructure-2-1-deploy-wireless-template/m-p/2493004#M2018 <P>As a test, I set up a simple template to push to one access point.&nbsp; I am doing this in PI2.1.&nbsp; Every time I try to deploy the template, it fails.&nbsp; I cant figure out why.&nbsp; So I am attaching a screenshot of the error and hope that some one else knows how to correct this issue.&nbsp; TIA!</P> Mon, 05 Jul 2021 08:28:50 GMT https://community.cisco.com/t5/wireless/prime-infrastructure-2-1-deploy-wireless-template/m-p/2493004#M2018 bm_5789 2021-07-05T08:28:50Z https://community.cisco.com/t5/wireless/prime-infrastructure-2-1-deploy-wireless-template/m-p/2493005#M2019 You have not set the SNMP write community string. if that's set then you will not see this error. Wed, 03 Sep 2014 08:59:27 GMT https://community.cisco.com/t5/wireless/prime-infrastructure-2-1-deploy-wireless-template/m-p/2493005#M2019 vivsreev 2014-09-03T08:59:27Z https://community.cisco.com/t5/wireless/prime-infrastructure-2-1-deploy-wireless-template/m-p/2493006#M2020 <P>http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-1/user/guide/pi_ug/create_temps.html</P> Sat, 20 Sep 2014 01:39:54 GMT https://community.cisco.com/t5/wireless/prime-infrastructure-2-1-deploy-wireless-template/m-p/2493006#M2020 Saurav Lodh 2014-09-20T01:39:54Z