topic Re: AIR-CAP1602 not joined in Wireless

AIR-CAP1602 not joined

Dmitry Klimenko — Mon, 05 Jul 2021 18:13:18 GMT

Hello!

We have AIR-CT2504-K9 and 4 AIR-CAP1602E-R-K9. 3 is working fine. AP licenses 15, used 14.

When try to join AP and change IP to static, AP not joined. Reset AP to default isnt help. What can be done for join AP?

Re: AIR-CAP1602 not joined

Leo Laohoo — Wed, 30 Oct 2019 10:14:59 GMT

Post the complete output to the following commands:
1. WLC: sh sysinfo;
2. WLC: sh time;
3. AP: sh version; and
4. AP: sh ip interface brief

Re: AIR-CAP1602 not joined

Dmitry Klimenko — Wed, 30 Oct 2019 11:07:38 GMT

WLC

(Cisco Controller) >show sysinfo

Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 8.0.140.0
Bootloader Version............................... 1.0.20
Field Recovery Image Version..................... 7.6.101.1
Firmware Version................................. PIC 16.0

Build Type....................................... DATA + WPS

System Name...................................... DKC6-WLC
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1279
IP Address....................................... 192.168.8.10
IPv6 Address..................................... ::
Last Reset....................................... Software reset
System Up Time................................... 72 days 2 hrs 22 mins 17 secs
System Timezone Location......................... (GMT +3:00) Baghdad
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180

--More-- or (q)uit

Configured Country............................... RU - Russian Federation
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +27 C
External Temperature............................. +32 C
Fan Status....................................... 4600 rpm

State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Disabled
Number of WLANs.................................. 1
Number of Active Clients......................... 25

Burned-in MAC Address............................ 54:78:1A:AC:59:80
Maximum number of APs supported.................. 75
System Nas-Id....................................
WLC MIC Certificate Types........................ SHA1

(Cisco Controller) >show time

Time............................................. Wed Oct 30 14:06:34 2019

Timezone delta................................... 0:0
Timezone location................................ (GMT +3:00) Baghdad

NTP Servers
NTP Polling Interval......................... 86400

Index NTP Key Index NTP Server NTP Msg Auth Status
------- ----------------------------------------------------------------------------------
1 0 192.168.8.8 AUTH DISABLED

AP isnt accessible via SSH. Ping is OK.

Re: AIR-CAP1602 not joined

vivek NAGAR — Wed, 30 Oct 2019 13:17:39 GMT

What is the procedure you are using to AP registration with WLC

1. STATIC

2. DHCP

3.DNS

4.Broadcast

Thanks

Vivek

Re: AIR-CAP1602 not joined

vivek NAGAR — Wed, 30 Oct 2019 13:27:14 GMT

I think you are using STATIC , If you have console can you please check and share the logs which received.

and please verify the AP policies in security tab what enabled "MIC" or any authentication-LIST.

Thanks

Vivek

Re: AIR-CAP1602 not joined

Dmitry Klimenko — Wed, 30 Oct 2019 14:04:49 GMT

AP get IP from DHCP on WLC, its OK.
On the first power on of this AP, it joined with DHCP assigned address. I rename AP and change IP to static. After that AP not joined. In debug on WLC i not see any reasons.

Re: AIR-CAP1602 not joined

Dmitry Klimenko — Wed, 30 Oct 2019 14:18:19 GMT

WLC policy in attach

Re: AIR-CAP1602 not joined

vivek NAGAR — Wed, 30 Oct 2019 14:17:45 GMT

Policy look good as it allowed "MIC" accept , do you have access for AP via console ? is DHCP is giving option 43 WLC information or you statically define WLC information in AP ?

Re: AIR-CAP1602 not joined

Dmitry Klimenko — Wed, 30 Oct 2019 14:23:53 GMT

DHCP have minimum options in web interface. AP success get IP.

Log from console copy later...

Re: AIR-CAP1602 not joined

Leo Laohoo — Wed, 30 Oct 2019 22:44:50 GMT

Is DHCP Option 43 configured (correctly)?

Re: AIR-CAP1602 not joined

vivek NAGAR — Thu, 31 Oct 2019 06:56:56 GMT

As per attachment you have DHCP on WLC , do you use static capwap command to reach WLC?

check the below blog for AP registration process will help you to understand

https://mrncciew.com/2013/03/17/ap-registration/

Re: AIR-CAP1602 not joined

Dmitry Klimenko — Thu, 31 Oct 2019 07:38:21 GMT

It turned out that the access point connected to the backup controller, although there are licenses on the primary controller. Changed the address to static, the access point is working on the network. As far as I understand, its operation time is limited by the license of the backup controller (evaluation).