topic Re: cisco 1702i Access point in Wireless

cisco 1702i Access point

marco_agroup — Mon, 05 Jul 2021 18:06:51 GMT

Hi, I've purchased a cisco 1702i AP. I need to use it as an autonomous AP and set it via it's onboard web server as I'm used to do with other "low cost" models and brands. Please let me know if it is possible and how to do it. I'm not sure the process is the conversione between CAPWAP or LWAP and IOS...

Please help.

marco.

Re: cisco 1702i Access point

Haydn Andrews — Wed, 09 Oct 2019 20:58:24 GMT

You need to download the autonomous image from Cisco.com first

Then you can follow the instructions of how to get the image onto the AP from my blog:

https://thewlan.com.au/2016/09/27/configuring-a-cisco-ap-for-site-survey/

to go from autonomous to lightweight you can follow:

https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01101110.pdf

Re: cisco 1702i Access point

Sandeep Choudhary — Thu, 10 Oct 2019 05:21:53 GMT

More info regarding conversion:

https://www.youtube.com/watch?v=nvgnhGO8_5Q

https://www.youtube.com/watch?v=pdYTxgEcpTc

Regards

Dont forget to rate helpful posts

Re: cisco 1702i Access point

marco_agroup — Fri, 11 Oct 2019 07:17:18 GMT

Good morning Haydn.
Thanks for the info.
They're clear, but once I try to download the Autonomous image from cisco.com, it reply that I must be a Cisco partner to be allowed.
We are an HVAC manufacturing Company and not a Cisco partner of course.
I've reguarly purchased the1702i on a website.
Are there any possibility for a customer to download the firmware, i.e providing the S/N of the unit or whatever to get the Cisco authorization?

Many thanks.

Marco.

Re: cisco 1702i Access point

amel.idrizovic — Thu, 05 Dec 2019 19:38:18 GMT

Can i ask i have ap 1702i coverted from w8 to w7 all is ok,but when i log in gui and try save anything i have error 404 no found