topic Re: Install license to 2504 with HA SKU in Wireless

Install license to 2504 with HA SKU

Richard Imus — Mon, 05 Jul 2021 18:01:22 GMT

Hi,

We have a 2504 with HA sku and doesn't have a purpose for it and now we're thinking of re-purposing it. My question is, is it possible to install an AP adder license to a 2504-HA and will the HA in the sku go away after? Thanks in advance.

Re: Install license to 2504 with HA SKU

Sandeep Choudhary — Thu, 19 Sep 2019 04:57:16 GMT

yes you can convert.

Starting from SW version 7.6, you can convert HA SKU WLC to primary WLC by issuing the command "config redundancy unit primary" followed by adding licenses to this controller.

via GUI:

following this route: Controller> General> HA SKU secondary unit> Disable.

Regards

Dont forget to rate helpful posts

Re: Install license to 2504 with HA SKU

Haydn Andrews — Thu, 19 Sep 2019 05:02:23 GMT

I don't see why not. You can convert non HA SKU WLCs to HA WLCs if they have 50 AP licences on them.

Might be best to email licensing@cisco.com and ask the question for a more definitive answer.

AS the 2504 is EOL I am not sure if you will even be able to purchase licences for it.

Re: Install license to 2504 with HA SKU

Sandeep Choudhary — Thu, 19 Sep 2019 06:20:28 GMT

Just for info:

Starting with 7.6, we can convert 2504 WLC to an HA SKU and vice versa. It does not need to have a minimum AP licenses. In that case you can use the one controller from the bundle to convert it in HA, under "Standby Controller Licensing":

Regards

Dont forget to rate helpful posts