topic Re: Mobility Express - how to install third party certificate in Wireless

Mobility Express - how to install third party certificate

jmprats — Mon, 05 Jul 2021 17:54:43 GMT

Hi, I would like to install a trusted third party certificate on Mobility Express for guest access to avoid the errors of the self signed the certificate. How can I do that?

Thanks

Re: Mobility Express - how to install third party certificate

Sandeep Choudhary — Tue, 27 Aug 2019 08:16:27 GMT

As pe rmy knowledge , procedure for ME WLC is same as normal WLC.

follow the guide and do it via CLI:

https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/109597-csr-chained-certificates-wlc-00.html

Regards

Dont forget to rate helpful posts

Re: Mobility Express - how to install third party certificate

jmprats — Tue, 27 Aug 2019 08:24:38 GMT

Thanks, but no GUI option in ME to import the certificate, everything for CLI, true?

Re: Mobility Express - how to install third party certificate

Sandeep Choudhary — Tue, 27 Aug 2019 09:58:04 GMT

yes its only via CLI.

Re: Mobility Express - how to install third party certificate

jmprats — Fri, 30 Aug 2019 09:01:32 GMT

I was able to install the certificate in the Mobility Express Controller 8.8.125, but now I have a problem: some devices recognize the certificate and the certification path, while other devices don't recognize the certification path (only the server certificate without CAs appear in their browsers).

The same certificate installed in WLC 5508 is recognized with the entire certification path for the same devices.

Any ideas?

Re: Mobility Express - how to install third party certificate

jmprats — Fri, 30 Aug 2019 09:39:49 GMT

I've done some testing

The same certificate is working fine if I downgrade the ME Controller to 8.5.140 (I can see all the certification path in the certificate)

But if I upgrade again to 8.8.125, again the certification path dissappears.

Re: Mobility Express - how to install third party certificate

patoberli — Mon, 02 Sep 2019 11:25:06 GMT

This might be a bug, please open a TAC to debug this further. I'm also curious if it's a setting or a bug.