topic Re: authentication with rsa token failed in Wireless

authentication with rsa token failed

n.steffen — Sat, 03 Jul 2021 20:48:59 GMT

hello everybody,

we installed a new wlc 4404 for wireless access.before we installed autonomus AP and with this all works fine!

the problem is with the client authentication.

old installation: Odyssey Client<>AP<>ACS<>RSA Server

new installation: Odyssey Client<>LWAP<>4404WLC<>ACS<>RSA Server

when i authenticate with the old installation: Peap starting with odyssey client , i enter response and i am open authenticated

when i authenticate with the new installation:Peap starting with odyssey client, i enter response i can not authenticate always the popup window for enter the response (passcode) comes up!

whats the problem?

its strange, when i autenticated with the old installation then i change to new installation i dosent must authenticate again and it works over the new installation. i recive a new ip from the WLC pool. when i start the pc new and i will authenticate with the new installation its doesent work.

thanks for a response

nik

Re: authentication with rsa token failed

ankbhasi — Thu, 22 Mar 2007 06:46:31 GMT

HI Nik,

I beleive in your new setup your controller can ping/reach ACS?

Regards,

Ankur

Re: authentication with rsa token failed

n.steffen — Thu, 22 Mar 2007 11:17:24 GMT

Hi Ankur,

Yes i can ping the ACS from WLC

ACS Software v 3.3

WLC Software 4.0.206.0

Nik

Re: authentication with rsa token failed

n.steffen — Thu, 22 Mar 2007 18:24:43 GMT

Hello

new info from WLC authentication log:

Thu Mar 22 18:20:09 2007 [SECURITY] 1x_ptsm.c 407: MAX EAP retransmissions reached for mobile 00:18:de:a5:a4:ef

Thu Mar 22 18:20:06 2007 [SECURITY] 1x_bauth_sm.c 423: Backend Authentication SM: abortAuth: Authentication Aborted.

Thu Mar 22 18:19:59 2007 [SECURITY] 1x_ptsm.c 407: MAX EAP retransmissions reached for mobile 00:18:de:a5:a4:ef

Thu Mar 22 18:19:59 2007 Previous message occurred 2 times

Thu Mar 22 18:19:19 2007 [SECURITY] 1x_auth_pae.c 2448: Reached Max EAP-Identity Request retries (21) for STA 00:18:de:a5:a4:ef

Thu Mar 22 18:18:59 2007 [SECURITY] 1x_ptsm.c 407: MAX EAP retransmissions reached for mobile 00:18:de:a5:a4:ef

Thu Mar 22 18:18:59 2007 Previous message occurred 2 times

Thu Mar 22 18:18:51 2007 [SECURITY] aaa.c 661: Authentication succeeded for admin user 'admin'

Thu Mar 22 18:17:25 2007 [SECURITY] 1x_ptsm.c 407: MAX EAP retransmissions reached for mobile 00:18:de:a5:a4:ef

Thu Mar 22 18:16:45 2007 [SECURITY] 1x_auth_pae.c 2448: Reached Max EAP-Identity Request retries (21) for STA 00:18:de:a5:a4:ef

Thu Mar 22 18:16:32 2007 [SECURITY] aaa.c 661: Authentication succeeded for admin user 'admin'

Thu Mar 22 18:16:25 2007 [SECURITY] 1x_auth_pae.c 2448: Reached Max EAP-Identity Request retries (21) for STA 00:18:de:a5:a4:ef

Re: authentication with rsa token failed

n.steffen — Tue, 27 Mar 2007 19:06:08 GMT

the problem is solved. we changed the timmer setting on wlc...

Re: authentication with rsa token failed

leon.mflai — Fri, 04 May 2007 04:38:11 GMT

Hi, what setting, "timer" or "timmer"?

Re: authentication with rsa token failed

shinkang.seo — Wed, 13 Jun 2007 04:38:12 GMT

Hi, I am also facing your problem which is little bit different. We can use Wireless for few hours however it did not last for a long time. Some user can use 2~3hours but suddenly request re-authentication. I would like to know what I can refer to solve this. Could you advise?

Our infrastructure is the same as you.