topic Multiple Aironet 2802i in ME!! in Wireless

Multiple Aironet 2802i in ME!!

tomjoshua7908 — Mon, 05 Jul 2021 17:50:23 GMT

Hello i have multiple 2802i AP running Mobility Express image. Primary 2802I is working and controller is running off that perfectly but the second 2802i AP which was converted over to ME has also joined the Controller but no under ME AP i see no clients connect to it, and the LED's are flashing RED/Blue/Green. I can see it has the same image as the other AP with ME Controller. What am i missing here?

Re: Multiple Aironet 2802i in ME!!

Rasika Nayanajith — Sat, 10 Aug 2019 19:08:19 GMT

Pls attach console output of that 2nd AP when it is registering to the primary 2802 ME

HTH

Rasika

Re: Multiple Aironet 2802i in ME!!

Daniel Ordóñez Flores — Mon, 12 Aug 2019 13:35:41 GMT

Hi @tomjoshua7908

Have you ever try to use just one AP as Controller and the rest as CAPWAP?

To convert the APs 2800 to CAPCAP just type ap-type capwap.

Espero que la información haya sido útil y si no tienes más preguntas recuerda cerrar el topic, seleccionando la respuesta como "Respuesta correcta"

**Please rate the answer if this information was useful***

**Por favor si la información fue util marca esta respuesta como correcta**

*Tu reconocimiento nos alienta a seguir participando en los foros *

Re: Multiple Aironet 2802i in ME!!

patoberli — Tue, 13 Aug 2019 08:14:32 GMT

Flashing RGB is typically not enough power, does it receive PoE+ or more?