topic Re: Update software vWLC in Wireless

Update software vWLC

sp1er — Mon, 05 Jul 2021 17:39:55 GMT

Good day!
I received new access points, and they require firmware 8.5.131 and higher, my controller has firmware 8.1.120. I downloaded 8.2.170, as well as 8.5.140, I try to install it, but after downloading to the vWLC controller it goes into reboot. What to do?

Re: Update software vWLC

Mark Elsen — Fri, 05 Jul 2019 17:11:53 GMT

- It looks like the transfer process get's killed ; does the vWLC have sufficient resources available such a memory (e.g.).

Re: Update software vWLC

sp1er — Mon, 08 Jul 2019 06:06:04 GMT

It have 1 CPU, and 2 gb Ram.

Think you need to increase to 2 cpu and 4 gb Ram

Re: Update software vWLC

Mark Elsen — Mon, 08 Jul 2019 07:51:58 GMT

- I always feel great when people can resolve their own problems. Can you give us feedback as to whether doing so resolved your issues ?

Re: Update software vWLC

sp1er — Mon, 08 Jul 2019 08:38:59 GMT

Yes!!! THX!

Here's another question, how to put the necessary version in Emergancy image?

Software version 8.5.131.0

Emergency image version 8.1.120.0

Re: Update software vWLC

Mark Elsen — Mon, 08 Jul 2019 16:08:28 GMT

- Emergency image get's upgraded on the next upgrade of the controller when the current release rolls down to the Emergency image (I think). You may want to verify this on a next upgrade, but even if my guess is wrong -> leave things as they are. The intend is that both images are not the same, hence a fatal issue with the production release would make the meaning of the Emergency image useless (as they would be the same).