What the command line on putty to enable webmode for Cisco AP 280E Series ME

IMAINASS — Mon, 05 Jul 2021 17:02:26 GMT

Please what could be the command line on putty to enable webmode for Cisco AP 280E Series ME i try

- ip http server

- config network webmode enable

None of them work

Re: What the command line on putty to enable webmode for Cisco AP 280E Series ME

IMAINASS — Tue, 12 Mar 2019 11:49:41 GMT

Sorry CISCo AP 2802E Serie

Re: What the command line on putty to enable webmode for Cisco AP 280E Series ME

Sandeep Choudhary — Tue, 12 Mar 2019 11:57:52 GMT

try these commands:

config network webmode {enable | disable }

config network secureweb {enable | disable }

if still not working then I suspect you did the wrong configuration on AP or on switchside port cofnig!

Regards

Dont forget to rate helpful posts

Re: What the command line on putty to enable webmode for Cisco AP 280E Series ME

IMAINASS — Tue, 12 Mar 2019 14:37:13 GMT

When I try the command
config network webmode enable I get the message bellow Invalid input detected at `` `` marker.
FYI I have convert my AP to ME by using Cisco 2800 Series Mobility Express Release 8.8 Software, AIR-AP2800-K9-ME-8-8-111-0.tar

Re: What the command line on putty to enable webmode for Cisco AP 280E Series ME

IMAINASS — Tue, 12 Mar 2019 15:07:48 GMT

See Also this a copie of my runing putty info it s will help

This product contains some software licensed under the
"GNU General Public License, version 2" provided with
--More-- [*05/02/2018 19:02:50.6886] waiting for uplink IP address and reachable default gateway
[*05/02/2018 19:02:50.6886]
ABSOLUTELY NO WARRANTY under the terms of
"GNU General Public License, version 2", available here:
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html

This product contains some software licensed under the
"GNU Library General Public License, version 2" provided
with ABSOLUTELY NO WARRANTY under the terms of "GNU Library
General Public License, version 2", available here:
http://www.gnu.org/licenses/old-licenses/lgpl-2.0.html

This product contains some software licensed under the
"GNU Lesser General Public License, version 2.1" provided
with ABSOLUTELY NO WARRANTY under the terms of "GNU Lesser
General Public License, version 2.1", available here:
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html

Cisco AP Software, (ap3g3), [cheetah-build1:/local/build/JENKINS/workspace/8.2MR5-barbados-CCO]
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Tue Mar 14 13:33:13 PDT 2017

ROM: Bootstrap program is U-Boot boot loader
BOOTLDR: U-Boot boot loader Version 2013.01-gf899470 (Aug 16 2018 - 15:50:45)

--More-- [*05/02/2018 19:02:55.6894] waiting for uplink IP address and reachable default gateway
[*05/02/2018 19:02:55.6894]
AP00FC.BAC9.5046 uptime is 0 days, 1 hours, 12 minutes
Last reload time : Wed May 2 17:49:37 UTC 2018
Last reload reason : 2: Capwap Discovery Failed

cisco AIR-AP2802E-B-K9 ARMv7 Processor rev 1 (v7l) with 1030580/720908K bytes of memory.
Processor board ID FJC2217M2CL
AP Running Image : 8.2.151.0
Primary Boot Image : 8.2.151.0
Backup Boot Image : 0.0.0.0
2 Gigabit Ethernet interfaces
2 802.11 Radios
--More-- [*05/02/2018 19:03:00.6902] waiting for uplink IP address and reachable default gateway
[*05/02/2018 19:03:00.6903]
Radio Driver version : 9.0.5.5-W8964
Radio FW version : 9.1.8.1
NSS FW version :

Base ethernet MAC Address : 00:FC:BA:C9:50:46
Part Number : 73-100822-05
PCA Assembly Number : 000-00000-00
PCA Revision Number :
PCB Serial Number : FDO22151ABS
Top Assembly Part Number : 068-100535-04
Top Assembly Serial Number : FJC2217M2CL
Top Revision Number : A0
Product/Model Number : AIR-AP2802E-B-K9

AP00FC.BAC9.5046#
AP00FC.BAC9.5046#
AP00FC.BAC9.5046#[*05/02/2018 19:03:05.6911] waiting for uplink IP address and reachable default gateway
[*05/02/2018 19:03:05.6911]
[*05/02/2018 19:03:10.6919] waiting for uplink IP address and reachable default gateway
[*05/02/2018 19:03:10.6919]
[*05/02/2018 19:03:15.6927] waiting for uplink IP address and reachable default gateway
[*05/02/2018 19:03:15.6927]
[*05/02/2018 19:03:20.6937] waiting for uplink IP address and reachable default gateway
[*05/02/2018 19:03:20.6937]

AP00FC.BAC9.5046#show version[*05/02/2018 19:03:25.6945] waiting for uplink IP address and reachable default gateway
[*05/02/2018 19:03:25.6946]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is subject to
restrictions as set forth in subparagraph (c) of the Commercial
Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and
subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
--More-- [*05/02/2018 19:03:30.6955] waiting for uplink IP address and reachable default gateway
[*05/02/2018 19:03:30.6955]
[*05/02/2018 19:03:35.6963] waiting for uplink IP address and reachable default gateway
[*05/02/2018 19:03:35.6963]
[*05/02/2018 19:03:40.6972] waiting for uplink IP address and reachable default gateway
[*05/02/2018 19:03:40.6972]
[*05/02/2018 19:03:45.6980] waiting for uplink IP address and reachable default gateway
[*05/02/2018 19:03:45.6980]

If you require further assistance please contact us by sending email to
export@cisco.com.

--More-- [*05/02/2018 19:03:50.6988] waiting for uplink IP address and reachable default gateway
[*05/02/2018 19:03:50.6988]
This product contains some software licensed under the
"GNU General Public License, version 2" provided with
ABSOLUTELY NO WARRANTY under the terms of
"GNU General Public License, version 2", available here:
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html

This product contains some software licensed under the
"GNU Library General Public License, version 2" provided
with ABSOLUTELY NO WARRANTY under the terms of "GNU Library
General Public License, version 2", available here:
http://www.gnu.org/licenses/old-licenses/lgpl-2.0.html

This product contains some software licensed under the
"GNU Lesser General Public License, version 2.1" provided
with ABSOLUTELY NO WARRANTY under the terms of "GNU Lesser
General Public License, version 2.1", available here:
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html

Cisco AP Software, (ap3g3), [cheetah-build1:/local/build/JENKINS/workspace/8.2MR5-barbados-CCO]
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Tue Mar 14 13:33:13 PDT 2017

ROM: Bootstrap program is U-Boot boot loader
BOOTLDR: U-Boot boot loader Version 2013.01-gf899470 (Aug 16 2018 - 15:50:45)
--More-- [*05/02/2018 19:03:55.6997] waiting for uplink IP address and reachable default gateway
[*05/02/2018 19:03:55.6997]

AP00FC.BAC9.5046 uptime is 0 days, 1 hours, 14 minutes
Last reload time : Wed May 2 17:49:37 UTC 2018
Last reload reason : 2: Capwap Discovery Failed

cisco AIR-AP2802E-B-K9 ARMv7 Processor rev 1 (v7l) with 1030580/720892K bytes of memory.
Processor board ID FJC2217M2CL
AP Running Image : 8.2.151.0
Primary Boot Image : 8.2.151.0
Backup Boot Image : 0.0.0.0
2 Gigabit Ethernet interfaces
2 802.11 Radios
Radio Driver version : 9.0.5.5-W8964
Radio FW version : 9.1.8.1
NSS FW version :

--More-- [*05/02/2018 19:04:00.7005] waiting for uplink IP address and reachable default gateway
[*05/02/2018 19:04:00.7005]
Base ethernet MAC Address : 00:FC:BA:C9:50:46
Part Number : 73-100822-05
PCA Assembly Number : 000-00000-00
PCA Revision Number :
PCB Serial Number : FDO22151ABS
Top Assembly Part Number : 068-100535-04
Top Assembly Serial Number : FJC2217M2CL
Top Revision Number : A0
Product/Model Number : AIR-AP2802E-B-K9

AP00FC.BAC9.5046#
[*05/02/2018 19:04:05.7013] waiting for uplink IP address and reachable default gateway
[*05/02/2018 19:04:05.7013]
AP00FC.BAC9.5046#[*05/02/2018 19:04:10.7022] waiting for uplink IP address and reachable default gateway
[*05/02/2018 19:04:10.7022]
[*05/02/2018 19:04:15.7030] waiting for uplink IP address and reachable default gateway
[*05/02/2018 19:04:15.7030]
[*05/02/2018 19:04:20.7038] waiting for uplink IP address and reachable default gateway
[*05/02/2018 19:04:20.7038]

Re: What the command line on putty to enable webmode for Cisco AP 280E Series ME

Haydn Andrews — Tue, 12 Mar 2019 22:17:00 GMT

Console into the AP and share the show version

The ME Deployment guide is located here

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-8/b_cisco_mobility_express_8_8/b_cisco_mobility_express_8_8_chapter_01.html

Re: What the command line on putty to enable webmode for Cisco AP 280E Series ME

Ric Beeching — Tue, 12 Mar 2019 23:20:55 GMT

You are running 8.2 so you might want to try 8.5.140.0 to resolve the bug for "waiting for uplink IP address and reachable default gateway". As Haydn has pointed out, the ME deployment guide is useful, are you following that to provision your AP via the default advertised SSID of CiscoAirProvison? What are you using for DHCP services on the wired side so the AP can pick up an IP?

Ric

Re: What the command line on putty to enable webmode for Cisco AP 280E Series ME

Sandeep Choudhary — Wed, 13 Mar 2019 06:17:31 GMT

looks like AP are still in CAPWAP mode.

Please convert AP to ME.

Regards

Dont forget to rate helpful posts

Re: What the command line on putty to enable webmode for Cisco AP 280E Series ME

IMAINASS — Wed, 13 Mar 2019 08:08:17 GMT

Many thanks for your support

topic What the command line on putty to enable webmode for Cisco AP 280E Series ME in Wireless

What the command line on putty to enable webmode for Cisco AP 280E Series ME

Re: What the command line on putty to enable webmode for Cisco AP 280E Series ME

Re: What the command line on putty to enable webmode for Cisco AP 280E Series ME

Re: What the command line on putty to enable webmode for Cisco AP 280E Series ME

Re: What the command line on putty to enable webmode for Cisco AP 280E Series ME

Re: What the command line on putty to enable webmode for Cisco AP 280E Series ME

Re: What the command line on putty to enable webmode for Cisco AP 280E Series ME

Re: What the command line on putty to enable webmode for Cisco AP 280E Series ME

Re: What the command line on putty to enable webmode for Cisco AP 280E Series ME