Aironet 1310: Ethernet disconnected or firmware failure?

mmauro — Mon, 05 Jul 2021 17:02:11 GMT

After 14 years of functioning, now I have a trouble with one of the two Aironets 1310.

It is not connected to the ethernet.

It is good connected to the other Aironet.

I already reboot devide and software. I disabled and enabled Etherent via web panel.

No change.

I carely checked cables. They seems to stay well connected.

Attached here are 4 images from the Aironet web panel and an IMPORTANT video which shows the 4 leds behaviour after power on.

Leds seem to indicate that there is a Firmware failure. I am not convinced of that.

Question: if the problem is in one of the coaxial cable (for example it is broken in the middle in a way that I can't see it) will the 4 leds have the same behaviour of the behaviour if I had a Firmware failure?

Thanks

Re: Aironet 1310: Ethernet disconnected or firmware failure?

Haydn Andrews — Tue, 12 Mar 2019 03:28:36 GMT

This document shows what the LEDs actually mean:

https://www.cisco.com/c/en/us/td/docs/wireless/access_point/1300/installation/guide/1300hig6.pdf

topic Aironet 1310: Ethernet disconnected or firmware failure? in Wireless

Aironet 1310: Ethernet disconnected or firmware failure?

Re: Aironet 1310: Ethernet disconnected or firmware failure?