topic Re: Mobility Express peer-to-peer blocking in Wireless

Mobility Express peer-to-peer blocking

rudimocnik — Mon, 05 Jul 2021 16:50:11 GMT

How can I enable peer to peer blocking on ME AP when using Client IP Management - Network (default)?

I know that when choosing Mobility Express Controller for Client IP Management a check box with Peer to Peer Block option appears but this is not available when choosing Network for Client IP Management. Can someone tell me why is that so and how to enable P2P blocking?

Thanks!

Re: Mobility Express peer-to-peer blocking

Sandeep Choudhary — Tue, 12 Feb 2019 06:36:12 GMT

As per my info, its only configured on Mobility Express Controller for Client IP Management.

For Client IP Management, select Mobility Express Controller
Check the Peer to Peer Block to disable communication between two clients on that WLAN.

If you enable P2P block then it will do the trio for that speciifc WLAN.

Regards

Dont forget to arte helpful posts

Re: Mobility Express peer-to-peer blocking

rudimocnik — Tue, 12 Feb 2019 07:21:09 GMT

But what if I want to serve IPs to client from the Network (VLAN) not the ME controller.

Re: Mobility Express peer-to-peer blocking

Haydn Andrews — Tue, 12 Feb 2019 09:02:02 GMT

Peer to peer blocking is for wireless client to wireless client so it wont affect the DHCP from the VLAN (wired)

Re: Mobility Express peer-to-peer blocking

rudimocnik — Tue, 12 Feb 2019 12:21:14 GMT

I am aware what peer to peer blocking does. I am refering to the Client IP Management setting because if I choose Controller it gives me an option to enable Peer to Peer Block. However, if I choose Network (default) the option to enable Peer to Peer Block is no longer available. I am not sure what does peer to peer blocking has to do with Client IP Management I just want to have Peer to Peer on my WLAN that uses Client IP Management set to Network.

Re: Mobility Express peer-to-peer blocking

Sandeep Choudhary — Tue, 12 Feb 2019 13:51:45 GMT

whcih software version you are running on MObility express controller ?

Re: Mobility Express peer-to-peer blocking

rudimocnik — Tue, 12 Feb 2019 13:54:14 GMT

All run 8.5.140.0

Re: Mobility Express peer-to-peer blocking

Sandeep Choudhary — Tue, 12 Feb 2019 14:05:59 GMT

try to upgrade the ME WLC to 8.8.111.0, there you will have option p2p for Network Client IP management.

check my screenshot:

Regards

Dont forget to rate helpful posts