AVC and WLC Load.

clearcall — Mon, 05 Jul 2021 16:29:30 GMT

Hi,

When considering this message from the WLCCA...

30070,General: AVC is recommended. Ensure you are using 8.0 or higher, and current load on WLC does not exceed 50%. WLAN: abcd

...does the 50% refer to cpu or memory usage?

Re: AVC and WLC Load.

Rasika Nayanajith — Fri, 23 Nov 2018 05:14:30 GMT

I would think it is AP count. (not 100% sure)

With AVC, if you trying do control part (re-mark, drop,etc) I think that would be more resource intensive & leading to WLC crashes/meltdown in large environment. Below bug may be one of reference that got many cases attached in 7.6/8.0 versions

https://bst.cloudapps.cisco.com/bugsearch/bug/CSCuq97965/

As long as you use it to get visibility (simple netflow export), I do not see a major issue of enabling that feature.

HTH

Rasika

*** Pls rate all useful responses ***

topic Re: AVC and WLC Load. in Wireless

AVC and WLC Load.

Re: AVC and WLC Load.