cannot log into 4400 lan wireless controller

a.ali — Mon, 05 Jul 2021 16:14:57 GMT

i have ( 4404 wireless lan controller) and i lost my data about the management ip and vlan.

i want to reset the controller to default factory, unfortunately i don't have a console cable to log into the controller and reset it.

can i hard reset it in anyway without the need of a console cable ?

Re: cannot log into 4400 lan wireless controller

Sandeep Choudhary — Tue, 02 Oct 2018 12:19:09 GMT

You have to get console access to reset 4400 WLC.

Here are the process:

1. First, you need to reset the controller. Enter reset system at the command prompt.

2. At the prompt that asks whether you need to save changes to the configuration, enter Y or N, doesn’t matter what you select. The controller will then reboot.

3. When you are prompted for a username, enter recover-config to restore the factory default configuration.

Press enter and the controller will reset back to factory default.

Regards

Dont forget to rate helpful posts

topic Re: cannot log into 4400 lan wireless controller in Wireless

cannot log into 4400 lan wireless controller

Re: cannot log into 4400 lan wireless controller