topic Re: Cisco ISE + WLC NAC in Wireless

Cisco ISE + WLC NAC

felcor — Mon, 05 Jul 2021 16:03:05 GMT

Hello All,

I have a problem with a kind of method authentication.

I was configured Mac filtering and Open authentication in my SSID, but when I mark option in NAS State as Radius NAC and then Apply the WLC give me the information:

Request Failed - Radius NAC is available only for WLAN with 802.1X/WPA/WPA2 Layer 2 security.

So I need this configuration for sucess in authentication and I cant to do this.

Somebody could help me ?

Re: Cisco ISE + WLC NAC

Flavio Miranda — Tue, 28 Aug 2018 20:08:17 GMT

"Radius NAC is available only for WLAN with 802.1X/WPA/WPA2 Layer 2 security."

What do you have on the WLAN Layer 2 security?

-If I helped you somehow, please, rate it as useful.-

Re: Cisco ISE + WLC NAC

Sandeep Choudhary — Wed, 29 Aug 2018 05:13:34 GMT

Hi,

My WLC SW version: 8.0.152.0

I am using SSID with

1. Layer 2security as NONE, MAC filtering enabled.

2. AAA override enabled

3. NAC state is RADIUS NAC

and its working.

So change these setting on SSID and try again.

Regards

Dont forget to rate helpful posts

Re: Cisco ISE + WLC NAC

felcor — Wed, 29 Aug 2018 11:51:51 GMT

WLC SW version: 7.0

I am using SSID with

1. Layer 2security as NONE, MAC filtering enabled. (the same)

2. AAA override enabled (the same)

3. NAC state is RADIUS NAC (whem I choose this option and click Apply the message show me that not is possible to do this)

Re: Cisco ISE + WLC NAC

felcor — Wed, 29 Aug 2018 11:53:14 GMT

Security is none (open)