topic Re: MU-MIMO access point question. in Wireless

MU-MIMO access point question.

IgorFi — Mon, 05 Jul 2021 16:00:05 GMT

Hi Folks,

I have a question related to a MU-MIMO (Cisco 1830 LAP) access point. But I think this applies to all MU-MIMO access points.

Could a MU-MIMO access point serve a 802.11g and 802.11n/ac clients simulteniously? Thank you.

Re: MU-MIMO access point question.

RichardAtkin — Sun, 19 Aug 2018 18:41:34 GMT

MU-MIMO is an AC concept, so no it won’t work for n(5GHz) Clients. That doesn’t impact / have anything to do with any 2.4GHz stuff though, which will continue unhindered regardless of what’s happening at 5GHz.

IgorFilipanov

IgorFi — Sun, 19 Aug 2018 18:52:03 GMT

Hi Richard. I'm not sure if did understand you.

"MU" can support multliple clients. So if there is one client that works on 2.4GHz and another on 5GHz, I expect the "MU" dual-band access point to serve them simultaneously. One antenna would be using 802.11g and another 802.11ac. It is like having two routers in one box.

Re: IgorFilipanov

RichardAtkin — Mon, 20 Aug 2018 05:19:53 GMT

Ok - crossed wires a little here. “MU-MIMO” usually refers to a feature in 802.11AC.

What you mean is ‘does an AP use both 2.4/5GHz radios simultaneously?’ The answer is yes; both radios are always on and can talk to clients in their own band without impact from the other radio.

Re: IgorFilipanov

IgorFi — Mon, 20 Aug 2018 18:50:20 GMT

Hi Richard.

Yes, this is what I wanted to know. Thank you.