topic AP Groups in Mobility Express in Wireless

AP Groups in Mobility Express

mhernandez — Mon, 05 Jul 2021 15:55:57 GMT

Hello,

I need to implement AP groups in a Cisco Mobility Express Environment.

In a production environment, WLANs (and clients too, as a consequence) take any subnet (VLAN) created in the AP master.

I'm sure this does not happen under a WLC environment, thanks to the ability to create interfaces and bind them with a WLAN.

So I would like to know how to achieve that with Mobility Express.

Thanks in advance!

Re: AP Groups in Mobility Express

Masato Ueoka — Thu, 02 Aug 2018 21:16:29 GMT

HI
you can use AP group CME 8.6 or later.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-6/b_cisco_mobility_express_8_6/b_cisco_mobility_express_8_6_chapter_0111.html
Regards,

Re: AP Groups in Mobility Express

mhernandez — Fri, 03 Aug 2018 11:27:00 GMT

Hello,

I'm already using that version. As you can see in the documentation provided, there's not enough information regarding how to bind a WLAN with a VLAN once the WLAN belongs to a specific AP Group.