topic Re: blinking lights? in Wireless

blinking lights?

warner — Mon, 05 Jul 2021 15:19:18 GMT

Is it possible to make the LED on an access point blink for ID purposes through CPI? We are running 3.2, if that makes a difference. I can see how to do it from the WLC, but I was hoping there was a way that would not mean giving out WLC access to a fleet of technicians. I suspect I'm out of luck, but maybe I'm missing something. Thanks.

Re: blinking lights?

Flavio Miranda — Thu, 01 Mar 2018 00:09:20 GMT

Could you elaborate?

What you mean by CPI ? Did you mean API?

And which version is 3.2?

The idea of less besides AP status is identify the AP, no big deal.

-If I helped you somehow, please, rate it as useful.-

Re: blinking lights?

Leo Laohoo — Thu, 01 Mar 2018 06:17:51 GMT

Not possible.

Re: blinking lights?

Sandeep Choudhary — Thu, 01 Mar 2018 06:33:58 GMT

If I undersatnd your question clearly then yes You can do it with Prime 3.2:

Go to Configurations > Templates > Lightweight Access Points

Here create a Template and make sure to check the box for AP LED status.

example in pic:

Regards

Dont forget to rate helpful posts

Re: blinking lights?

warner — Thu, 01 Mar 2018 14:39:43 GMT

CPI is Cisco Prime Infrastructure. It's Cisco's management platform.