topic Honestly I don't know if you in Wireless

Upgrading Device Profiling

Yadira — Mon, 05 Jul 2021 13:26:26 GMT

I want to upgrade the device types for WLC version 8.0.140.0.

I read than I can upgrade the OUIs from IEEE page ( http://standards.ieee.org/develop/regauth/oui/oui.txt ), but, is it possible to add more devices types in the Device Profiling without cisco ISE? And, If I upgrade the OUIs, I'll lost the older or the news OUI's only are added.

Sorry for my English, this is not my native lenguaje.

When you download the OUI

Leo Laohoo — Thu, 26 Jan 2017 01:34:26 GMT

When you download the OUI list, you download the ENTIRE list (and not just the new ones).

Make sure you have authorized change control in place. I once crashed a pair of HA controllers when I upgraded the OUI.

Hi

Francesco Molino — Thu, 26 Jan 2017 01:43:43 GMT

This isn't an incremental update, it will replace all the database.

OUI and device profiling are 2 different databases.

I had some issues in the past. Sometimes the updates doesn't work and the database well be empty.

There only way to solve will be to re-apply the software code.

Thanks

PS: Please don't forget to rate and mark add correct answer if this answered your question

Thanks so much, the problem

Yadira — Thu, 26 Jan 2017 02:55:24 GMT

Thanks so much, the problem actually was than I made a policy to block cellphone devices, but some pc's are matching in the policy or some devices appear as unclassified, I assumed that upgrading the OUIs help to classified correct this devices, or upgrading the devices profiling, but I don't found the way to upgrade the device profiling without ISE.

If you have any suggestions on how to solve it, I would be grateful if you would share it with me.

Without ISE, there aren't

Francesco Molino — Thu, 26 Jan 2017 03:36:05 GMT

Without ISE, there aren't multiple solutions.

You have to update OUI and device profiling on wlc.

Thanks

I searched but can't found

Yadira — Thu, 26 Jan 2017 04:24:07 GMT

I searched but can't found the .xml file to upgrade the device profiling, is it available in the Cisco support page or how I can get it?

Thanks again.

Honestly I don't know if you

Francesco Molino — Thu, 26 Jan 2017 04:38:05 GMT

Honestly I don't know if you can get it on Cisco web site.

You can export it from Cisco ISE.

If you have demo version then you are able to take it and upload in your wlc.

Maybe there is another way but I'm not aware of. I used to export it from ISE

Thank so much for your help,

Yadira — Thu, 26 Jan 2017 04:58:52 GMT

Thank so much for your help, I will try that.

Regards.