topic Hi, in Wireless

tpc

muhsi_2015 — Mon, 05 Jul 2021 12:59:35 GMT

Hi,

tpc min 11 dBm
channel 36 power shows level 3 ( 5 dBm)
why does it go below tpc min

Thanks

are you sure about the

pieterh — Tue, 18 Oct 2016 14:10:40 GMT

are you sure about the numbers?

my guess is it will show -11dBm and -5dBm (beware the minus sign)

so -5 is higher level than -11 not below

Regards

Hi

muhsi_2015 — Sun, 23 Oct 2016 07:16:59 GMT

tpc

Maximum Power Level Assignment(-10 to 30 dBm) = 16

Minimum Power Level Assignment(-10 to 30 dBm)= 11

UNII 1 UNII 2 / 3

1 = 11 dBm / 12.5 mW 1 = 17 dBm / 50mW
2 = 8 dBm / 6.25 mW 2 = 14 dBm / 25 mW
3 = 5 dBm / 3 mW 3 = 11 dBm / 12.5 mW
4 = 2 dBm / 1.5 mW 4 = 8 dBm / 6.25 dBm

802.11a/n/ac radios
apname baseradio mac channel power level
test 36 3(*)

As per the tpc value the power should be in between 11 and 16
Correct ?

Thanks

Should never go below the mix

Scott Fella — Sun, 23 Oct 2016 16:59:01 GMT

Should never go below the mix to power you have set. The question is, you using RF-Profile or using global settings. The RF-Profile defined in an AP Group will override the global setting but if all your AP's are in the default group or AP Group is using RF-Profile of none, then the global is used.

-Scott

*** Please rate helpful posts ***

Hi,

muhsi_2015 — Sun, 23 Oct 2016 19:00:07 GMT

Hi,

Wlc is 5760 , there is no rf profile feature

Thanks

Well then, open a TAC case..

Scott Fella — Sun, 23 Oct 2016 19:07:08 GMT

Well then, open a TAC case...Converged access never worked as well as AireOS and thus why it's going end of sale.

-Scott

*** Please rate helpful post ***

Hi,

muhsi_2015 — Sun, 23 Oct 2016 19:20:03 GMT

Hi,

You meand wlc 5760 going to end of sale

Thanks

Yup... Leo shared some info

Scott Fella — Sun, 23 Oct 2016 19:33:19 GMT

Yup... Leo shared some info on this to a few of us, but I believe it's also published not too long ago.

-Scott

*** Please rate helpful posts ***

Here you go:

Scott Fella — Sun, 23 Oct 2016 19:35:31 GMT

Here you go:

http://www.cisco.com/c/en/us/products/collateral/wireless/5760-wireless-lan-controller/eos-eol-notice-c51-738028.html?vs_f=RSS+Feed+for+End-of-Sale+and+End-of-Life+Products&vs_p=End-of-Sale+and+End-of-Life+Announcement+for+the+Cisco+5760+Wireless+LAN+Controller&vs_k=1

-Scott

*** Please rate helpful posts ***

Hi,

muhsi_2015 — Sun, 23 Oct 2016 21:22:38 GMT

Hi,

"Should never go below the mix to power you have set.

max power ?

Thanks

Hi Scott,

muhsi_2015 — Tue, 25 Oct 2016 08:05:52 GMT

Hi Scott,

This could be regulatory domain power limit ?

Thanks

Regulatory domain ensure the

Scott Fella — Tue, 25 Oct 2016 13:28:00 GMT

Regulatory domain ensure the max allowed. Min TX has nothing to do with that as this settInc tells the controller not to ever go below this TX power level. This goes for the Mac TX also, but now the regulatory max TX comes into play. Your AP will not be able to transmit higher than what it is allowed by the regulatory setting for max power.

-Scott

*** Please rate helpful posts ***