https://community.cisco.com/t5/wireless/cannot-get-dot11radio-configured/m-p/2913691#M208769 <P>Hello, I am experiencing difficulty with a router entering into dot11radio0. It is an 881 w ISR with a Cisco IOS version 15.1. when I enter this command I get an invalid syntax message. I am new at configuring wireless, and am not sure of what I am doing. All videos I have watched, manuals I have read, show this configuration below.</P> <P>conf t</P> <P>int dot11radio0</P> <P>This is as far as I get, and get the error message. Am I missing a step, or doing something wrong?</P> Mon, 05 Jul 2021 11:45:54 GMT jturpin011 2021-07-05T11:45:54Z https://community.cisco.com/t5/wireless/cannot-get-dot11radio-configured/m-p/2913691#M208769 <P>Hello, I am experiencing difficulty with a router entering into dot11radio0. It is an 881 w ISR with a Cisco IOS version 15.1. when I enter this command I get an invalid syntax message. I am new at configuring wireless, and am not sure of what I am doing. All videos I have watched, manuals I have read, show this configuration below.</P> <P>conf t</P> <P>int dot11radio0</P> <P>This is as far as I get, and get the error message. Am I missing a step, or doing something wrong?</P> Mon, 05 Jul 2021 11:45:54 GMT https://community.cisco.com/t5/wireless/cannot-get-dot11radio-configured/m-p/2913691#M208769 jturpin011 2021-07-05T11:45:54Z https://community.cisco.com/t5/wireless/cannot-get-dot11radio-configured/m-p/2913692#M208770 <P>What error you are getting, can you post the error?</P> <P>Refer the configuration guide for radio : <A href="http://www.cisco.com/en/US/docs/routers/access/800/880/software/configuration/guide/880_radio_config.html">http://www.cisco.com/en/US/docs/routers/access/800/880/software/configuration/guide/880_radio_config.html</A></P> Tue, 15 Mar 2016 02:18:00 GMT https://community.cisco.com/t5/wireless/cannot-get-dot11radio-configured/m-p/2913692#M208770 mohanak 2016-03-15T02:18:00Z