topic ROMMON on any Cisco access in Wireless

IOS UPGRADE

Jonathan Chatman Jr. — Mon, 05 Jul 2021 11:05:48 GMT

I intentionally broke my AP to see if i can recover it, but i'm having some issues, how do I upload the IOS from the boot rommon?

ap: ?
? -- Present list of available commands
arp -- Show arp table or arp-resolve an address
boot -- Load and boot an executable image
cat -- Concatenate (type) file(s)
clear_ether -- clear ethernet port statistics
copy -- Copy a file
delete -- Delete file(s)
dir -- List files in directories
dump_regs -- dump reset registers
etest -- test emac driver code
ether_init -- initialize ethernet port
flash_init -- Initialize flash filesystem(s)
format -- Format a filesystem
fsck -- Check filesystem consistency
help -- Present list of available commands
init_pci -- initialize pci bridge
led_test -- cycle LED patterns
load_helper -- Load and initialize a helper image
memory -- Present memory heap utilization information
mkdir -- Create dir(s)
more -- Concatenate (display) file(s)
rename -- Rename a file
reset -- Reset the system
rmdir -- Delete empty dir(s)
set -- Set or display environment variables
set_baud -- set baud rates
set_sleep -- Pause (sleep) for a specified number of seconds
show_ether -- show ethernet port statistics
show_pci -- show pci setting
switch -- report push button switch status
tar -- extract or listing a tar file
tftp_init -- Initialize tftp file system
type -- Concatenate (type) file(s)
unset -- Unset one or more environment variables
version -- Display boot loader version

Using a TFTP Server to Return

Leo Laohoo — Wed, 14 Oct 2015 21:37:56 GMT

Using a TFTP Server to Return to a Previous Release

Load an IOS onto a Cisco

mohanak — Thu, 15 Oct 2015 11:26:11 GMT

Load an IOS onto a Cisco router using the ROMmon mode : https://learningnetwork.cisco.com/thread/22079

Does these steps work for the

Jonathan Chatman Jr. — Thu, 15 Oct 2015 15:06:19 GMT

Does these steps work for the 3700 series?

ROMMON on any Cisco access

Scott Fella — Fri, 16 Oct 2015 00:40:28 GMT

ROMMON on any Cisco access point is the same. You need to be able to download the image before you can recover the access point.

-Scott

Does these steps work for the

Leo Laohoo — Fri, 16 Oct 2015 07:29:16 GMT

Does these steps work for the 3700 series?

Of course.