topic If you created a dynamic in Wireless

Adding another mgt interface 2504

Eric Kemsley — Mon, 05 Jul 2021 09:52:39 GMT

How do I add another management interface to a 2504 controller? I have port 1 setup when I first installed the WLC. But I want port 2, with a different ip address, to be able to access the WLC too.

port 1 = 10.0.0.1/24 which works ok.

port 2 - 10.17.1.25/16 is the other port i want.

If you created a dynamic

Scott Fella — Wed, 08 Apr 2015 16:24:40 GMT

If you created a dynamic interface and assigned that to port 2, what you need to do to access the WLC management is to allow management via wireless using the dynamic interface. This is the command you need to enter:

config network mgmt-via-dynamic-interface enable

-Scott