2602i remove files from Flash / recover from rommon

Bruno Dinis — Mon, 05 Jul 2021 08:11:32 GMT

hello all, I've got a particular question, not anwered in other foruns i've searched.

My Cisco Aironet 2602i is in the rommon state

ap:

set IP_ADDR 10.2.104.152

set NETMASK 255.255.255.0

set DEFAULT_ROUTER 10.2.0.254

tftp_init

ether_init

flash_init

tar -xtract tftp://a.b.c.d/networking/software/AP/AP_2600/autonomous/ap3g2-k9w7-tar.152-4.JB5.tar flash:

everything was going ok, when the AP said that's not enough space on the flash to write the new code.

So I've done

ap: dir flash:
2 -rwx 20818 <date> event.log
3 -rwx 3828 <date> private-config
4 -rwx 64 <date> sensord_CSPRNG0
5 -rwx 286 <date> info
6 drwx 2048 <date> ap3g2-k9w8-mx.152-4.JB5
7 drwx 512 <date> ap3g2-rcvk9w8-mx
13 drwx 192 <date> ap3g2-k9w7-mx.152-4.JB5
50 drwx 0 <date> configs
68 -rwx 64 <date> sensord_CSPRNG1
69 -rwx 3096 <date> private-multiple-fs
262 -rwx 209 <date> env_vars

I cannot delete the 3 folders (line 6,7,13)

I've tried the following commands:

ap: delete /recursive /force flash:ap3g2-rcvk9w8-mx

Are you sure you want to delete "/recursive" (y/n)?n
File "/recursive" not deleted
Are you sure you want to delete "/force" (y/n)?n
File "/force" not deleted
Are you sure you want to delete "flash:ap3g2-rcvk9w8-mx" (y/n)?y
File "flash:ap3g2-rcvk9w8-mx" not deleted -- is a directory

I've also tried:

ap: cd ap3g2-k9w8-mx.152-4

Unknown cmd: cd

ap: delete flash:ap3g2-rcvk9w8-mx

Are you sure you want to delete "flash:ap3g2-rcvk9w8-mx" (y/n)?y
File "flash:ap3g2-rcvk9w8-mx" not deleted -- is a directory

any thoughts?

the correct command to delete

Bruno Dinis — Tue, 08 Jul 2014 11:33:36 GMT

the correct command to delete a file inside a directory is

ap: delete flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-xx
Are you sure you want to delete "flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-xx" (y/n)?y
File "flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-xx" deleted

Problem solved.

cheers!

topic the correct command to delete in Wireless

2602i remove files from Flash / recover from rommon

the correct command to delete