topic thaks kaaftab in Wireless

cisco switch 2960 error disable issue

KAMAL MISHRA — Mon, 05 Jul 2021 07:39:05 GMT

Dear Team,

i have an issue i have two cisco 2960 switches both are connected with each other but in one switch one of my port is going on error disable after some time .

here i am attaching my conf of both switches

problem is at switch 244 on port gi 1/0/20

Hi, can you post the output

luckymike33 — Wed, 09 Apr 2014 12:16:52 GMT

Hi,

can you post the output from the followng command from switch 244.

show log

show int status

show run int gi1/0/20

Very best wishes

Mike

Hi,Once your port get error

Rasika Nayanajith — Wed, 09 Apr 2014 21:10:18 GMT

Hi,

Once your port get error disabled, get this output & post it here

show interfaces status err-disabled

HTH

Rasika

**** Pls rate all useful responses ****

Do share the out of the

kaaftab — Tue, 15 Apr 2014 10:43:35 GMT

Do share the out of the command and if possible the log from the switch.

and use the command # error-disable recovery to recover

Dear Sir, i have make the

KAMAL MISHRA — Thu, 17 Apr 2014 04:52:59 GMT

Dear Sir,

i have make the port no shut and reconfigure that switch its on under observation.

thaks kaaftab

KAMAL MISHRA — Thu, 17 Apr 2014 04:54:29 GMT

thaks kaaftab