topic Re: show sysinfo command output in Wireless

show sysinfo command output

vijay kumar — Mon, 05 Jul 2021 07:04:31 GMT

Hi all ,

In our cisco 5508 WLC show sysinfo output , we are not able to see the current license level and license level on next reboot.

Any idea on why it is not showing?

Thanks,

Vijay

Re: show sysinfo command output

Rasika Nayanajith — Fri, 31 Jan 2014 07:17:46 GMT

Hi Vijay,

Show sysinfo does not provide that information. Here is what show sysinfo provide. Probably you need to look at "show license summary" output

(WC01) >show sysinfo

Manufacturer's Name.............................. Cisco Systems Inc.

Product Name..................................... Cisco Controller

Product Version.................................. 7.4.111.5

Bootloader Version............................... 1.0.16

Field Recovery Image Version..................... 7.0.112.21

Firmware Version................................. FPGA 1.7, Env 1.8, USB console 2.2

Build Type....................................... DATA + WPS

System Name...................................... WC01

System Location.................................. ELT

System Contact................................... ICT

System ObjectID.................................. 1.3.6.1.4.1.9.1.1069

Redundancy Mode.................................. Disabled

IP Address....................................... 10.14.7.247

Last Reset....................................... Software reset

System Up Time................................... 2 days 5 hrs 11 mins 56 secs

System Timezone Location......................... (GMT+10:00) Sydney, Melbourne, Canberra

System Stats Realtime Interval................... 5

System Stats Normal Interval..................... 180

Configured Country............................... AU - Australia

Operating Environment............................ Commercial (0 to 40 C)

Internal Temp Alarm Limits....................... 0 to 65 C

Internal Temperature............................. +30 C

External Temperature............................. +18 C

Fan Status....................................... OK

State of 802.11b Network......................... Enabled

State of 802.11a Network......................... Enabled

Number of WLANs.................................. 3

Number of Active Clients......................... 116

Memory Current Usage............................. Unknown

Memory Average Usage............................. Unknown

CPU Current Usage................................ Unknown

CPU Average Usage................................ Unknown

Burned-in MAC Address............................ D0:D0:FD:1F:C2:00

Power Supply 1................................... Present, OK

Power Supply 2................................... Present, OK

Maximum number of APs supported.................. 350

(WC01) >show license summary

License Store: Primary License Storage

StoreIndex: 1 Feature: base-ap-count Version: 1.0

License Type: Permanent

License State: Inactive

License Count: 250 / 0 (Active/In-use)

License Priority: Medium

License Store: Primary License Storage

StoreIndex: 2 Feature: base-ap-count Version: 1.0

License Type: Permanent

License State: Active, In Use

License Count: 350 /350 (Active/In-use)

License Priority: Medium

HTH

Rasika

**** Pls rate all useful responses ****

show sysinfo command output

vijay kumar — Fri, 31 Jan 2014 07:40:40 GMT

Hi Rasika ,

But in the configuration guide of 7.2 release I am able to see that it displays the license info.

http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70ccfg.pdf

Bootloader Version............................... 5.2

Emergency Image Version.......................... N/A

Build Type....................................... DATA + WPS

System Name...................................... Cisco 69

System Location.................................. na

System Contact................................... abc@cisco.com

System ObjectID.................................. 1.3.6.1.4.1.14179.1.1.4.3

IP Address....................................... 10.10.10.10

System Up Time................................... 3 days 1 hrs 12 mins 42 secs

System Timezone Location.........................

CurrentBoot License Level..........................base

CurrentBoot License Type...........................Permanent

NextBoot License Level............................base

NextBoot License Type.............................Permanent

Operating Environment............................ Commercial (0 to 40 C)

Internal Temp Alarm Limits....................... 0 to 65 C

Internal Temperature............................. +40 C

State of 802.11b Network......................... Enabled

State of 802.11a Network......................... Enabled

Number of WLANs.................................. 4

Number of Active Clients......................... 0

Burned-in MAC Address............................ 00:1A:6D:DD:1E:40

Crypto Accelerator 1............................. Absent

Crypto Accelerator 2............................. Absent

Power Supply 1................................... Absent

Power Supply 2................................... Present, OK

Maximum number of APs supported.................. 12

Re: show sysinfo command output

kaaftab — Fri, 31 Jan 2014 09:45:08 GMT

check the following link for command line guide

http://www.cisco.com/en/US/partner/docs/wireless/controller/7.0/command/reference/cli70over.html

http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70ovrv.html

Re: show sysinfo command output

Scott Fella — Fri, 31 Jan 2014 12:32:03 GMT

It depends on what code you are on. With the later code versions of the WLC, you need to issues the show license summary like Rasika posted.

Sent from Cisco Technical Support iPhone App

show sysinfo command output

vijay kumar — Fri, 31 Jan 2014 17:47:48 GMT

Hi Scott,

We are running 7.2 version . But it is not displaying the license information as given in the config guide.

Re: show sysinfo command output

Scott Fella — Fri, 31 Jan 2014 18:03:04 GMT

Maybe the guide is wrong:).

Show license summary is usually what used though.

Sent from Cisco Technical Support iPhone App

show sysinfo command output

vijay kumar — Fri, 31 Jan 2014 18:14:51 GMT

ok .. Thanks for the clarifiation Scott.