topic Re: WEBGUI 3850 SWITCH in Wireless

WEBGUI 3850 SWITCH

dnspacket1 — Mon, 05 Jul 2021 06:56:45 GMT

Dears,

I have cisco 3850 switch with with ios 3.03.01SE .

How we can enable webgui for 3850s. i referred the below link to do this activity

There is inbuilt wireless controller on this switch.

I am unable to get any of the options as the wireless gui webpage itself is not coming.

Please help me how we can do this configs

Regards

Deva

Sandeep Choudhary — Mon, 13 Jan 2014 06:14:52 GMT

HI Deva,

Onboard web GUI requires Cisco IOS XE Release 3.2.2SE or later.

Go to CLI and congfigure these:

If you want unsecured (http://) web access, go to conf t and enter:

ip http server

If you want secure (https://) access, go to conf t and enter:

ip http secure-server

Regards

dnspacket1 — Mon, 13 Jan 2014 07:55:37 GMT

Dear Sandeep,

I am able to access the switch. But I am unable to access the WLC settings.

But WLC is already configured and APs are associated on it.

But its configured without service port..

Sandeep Choudhary — Mon, 13 Jan 2014 09:03:43 GMT

HI Deva,

Di d u tried thsi:

The GUI can be accessed via https:///wireless

Check this:

Regards

Rasika Nayanajith — Mon, 13 Jan 2014 10:20:41 GMT

Try different browser & see. Below should work

https:///wireless

HTH

Rasika