topic Re: Radius errors after changing servers in Wireless

Radius errors after changing servers

lcaruso — Sun, 04 Jul 2021 08:06:34 GMT

Hi,

I'm still trying to get access so I cannot relate the exact error message, but after changing a 5508 to use a Server 2012 Radius server (from Server 2008), the 5508 is showing error messages about it cannot contact the Radius server even though it can ping the Radius server and authentication is working from the new radius server.

The 5508 is running older 7.0x code. Is that the cause of the messages?

Thanks.

Re: Radius errors after changing servers

Richard Atkin — Fri, 18 Oct 2013 07:40:53 GMT

Software version shouldn't affect it. Have you checked the necessary ports (1645,1646,1812,1813) and the Shared Secret? And have you checked the new RADIUS box has all of the correct rules,, EAP Types and Certs that you need?

Sent from Cisco Technical Support iPad App

Re: Radius errors after changing servers

lcaruso — Fri, 18 Oct 2013 13:26:11 GMT

Thanks for responding. It turns out the secure wlan used certs and the new server did not have the Windows Server Enterprise cert installed so we pointed that wlan back to the old radius/dhcp servers and it worked.