topic Remove Web-Passthrough certificate error bypass in Wireless

Remove Web-Passthrough certificate error bypass

JASON SIMMONS — Sun, 04 Jul 2021 07:51:39 GMT

I'm almost positive I read somewhere on the board that there was a way tp prevent the certificate error from appearing on a Web-Passthrough portal page WITHOUT installing a certificate. Will someone please post a link?

Remove Web-Passthrough certificate error bypass

Stephen Rodriguez — Tue, 17 Sep 2013 16:41:05 GMT

you can disable secure webauth

Cisco Controller) >config network web-auth secureweb enable/disable

Enable - Enables https for web-auth redirection.

Disable - Enables http for web-auth redirection.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Remove Web-Passthrough certificate error bypass

JASON SIMMONS — Tue, 17 Sep 2013 17:14:21 GMT

Thanks!

Does this also mean that I can access the controllers gui from http:// instead of https:// now?

Remove Web-Passthrough certificate error bypass

Stephen Rodriguez — Tue, 17 Sep 2013 17:15:32 GMT

You've always been able to do that, you just have to disable secure-web entireley, and reboot the WLC.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Remove Web-Passthrough certificate error bypass

JASON SIMMONS — Tue, 17 Sep 2013 17:17:33 GMT

Foreal????

I dont think I ever tried. oh well.

Thanks!

Remove Web-Passthrough certificate error bypass

nikhilcherian — Wed, 18 Sep 2013 03:07:57 GMT

"config network webmode enable" will be needed to access the web-page of the WLC with http.