topic Multiple RRM Groups in Wireless

Multiple RRM Groups

ajuarez — Sun, 04 Jul 2021 07:35:25 GMT

Is it possible to setup a Cisco 8510 with multiple RRM groups, we are taking over a new building where the 1252 series AP's are on a DAS system, and need to have DCA, and TPC disabled.

Multiple RRM Groups

Stephen Rodriguez — Mon, 05 Aug 2013 18:08:49 GMT

Yes, you could put those AP in their own RF profile.

http://www.cisco.com/en/US/docs/wireless/controller/7.4/configuration/guides/wlan/config_wlan_chapter_011100.html

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Multiple RRM Groups

ajuarez — Mon, 05 Aug 2013 18:22:02 GMT

The RF profile, does not have an option to disable TPC, only change the default values, and there is no option for DCA.

Multiple RRM Groups

Stephen Rodriguez — Mon, 05 Aug 2013 18:23:57 GMT

True, but then you hard set your channel and powe per AP. Which does disable TPC and DCA.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Multiple RRM Groups

Abhishek Abhishek — Mon, 05 Aug 2013 18:53:25 GMT

Hello,

As per your query i can suggest you the following solution-

Yes, it is possible to setup a Cisco 8510 with multiple RRM groups.

Hope this will help you.