Network Engineer

matinpawaskar1 — Sun, 04 Jul 2021 07:16:35 GMT

Can Any one help in on the below,

My AP is not able to join the controller the logs are attached below which I am facing on the AP.

*Mar 1 00:00:02.231: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed

*Mar 1 00:00:03.555: %DOT11-2-NO_FIRMWARE: Interface Dot11Radio0, no radio firmware file (8005.img) was found

*Mar 1 00:00:03.555: %DOT11-2-NO_FIRMWARE: Interface Dot11Radio0, no radio

nv_done: unable to open "flash:/private-multiple-fs.new" firmware file (flash:/8005.img) was found

*Mar 1 00:00:03.555: %DOT11-2-RESET_RADIO: Restarting Radio interface Dot11Radio0 due to get code failed: firmware file not found

*Mar 1 00:00:03.555: %DOT11-2-RESET_RADIO: Restarting Radio interface Dot11Radio0 due to get code failed

*Mar 1 00:00:03.615: %DOT11-2-NO_PWR_TBL: Interface Dot11Radio0, no radio Power Table file (A5.bin) was found

*Mar 1 00:00:03.671: %DOT11-2-NO_FIRMWARE: Interface Dot11Radio1, no radio firmware file (8005.img) was found

*Mar 1 00:00:03.671: %DOT11-2-NO_FIRMWARE: Interface Dot11Radio1, no radio firmware file (flash:/8005.img) was found

*Mar 1 00:00:03.671: %DOT11-2-RESET_RADIO: Restarting Radio interface Dot11Radio1 due to get code failed: firmware file not found

*Mar 1 00:00:03.671: %DOT11-2-RESET_RADIO: Restarting Radio interface Dot11Radio1 due to get code failed

*Mar 1 00:00:03.687: Unsupported radio found of type 0

*Mar 1 00:00:04.903: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up

*Mar 1 00:00:06.371: %SYS-5-RESTART: System restarted --

Cisco IOS Software, C1600 Software (AP1G2-K9W8-M), Version 15.2(2)JA, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Compiled Thu 23-Aug-12 03:45 by prod_rel_team

*Mar 1 00:00:06.371: %SNMP-5-COLDSTART: SNMP agent on host ap is undergoing a cold start

*Mar 1 00:00:06.403: bsnInitRcbSlot: slot 0 has venus radio(UNSUPPORT)

*Mar 1 00:00:06.403: bsnInitRcbSlot: slot 1 has venus radio(UNSUPPORT)

*Mar 1 00:00:06.403: bsnInitRcbSlot: Slot 1 has same radio type as slot 0. Disabling radio in slot 1.

*Mar 1 00:00:06.403: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. Initialising Cfg

*Mar 1 00:00:06.403: %CAPWAP-3-ERRORLOG: Failed to load configuration from flash. Resetting to default config

*Mar 1 00:00:06.407: %LWAPP-3-CLIENTERRORLOG: flash:/configs directory creation failed

*Mar 1 00:00:06.407: %SYS-2-NULLCHUNK: Memory requested from Null Chunk -Process= "CAPWAP CLIENT", ipl= 0, pid= 115

-Traceback= 28D868z 37D460z 9EEE1Cz 9BA4A0z 9AA508z 9DC324z 9415D8z 921AD8z 921EB0z 9388F4z 410660z 3F5798z

*Mar 1 00:00:06.407: %LWAPP-3-CLIENTERRORLOG: Save LWAPP Config: error saving config file

*Mar 1 00:00:06.411: %LWAPP-3-CLIENTERRORLOG: flash:/configs directory creation failed

*Mar 1 00:00:06.411: %LWAPP-3-CLIENTERRORLOG: Save LWAPP Config: error saving config file

*Mar 1 00:00:06.415: bsnUnlockDevice: not bring radio up: radio 0 is in admin disable state

*Mar 1 00:00:06.415: bsnUnlockDevice: not bring radio up: radio 1 is in admin disable state

*Mar 1 00:00:06.423: MIC Load Keypairs Error, Unable to Read MagicData

*Mar 1 00:00:06.423: MIC Load Cert Error, Unable to Read MagicDatalwapp_crypto_init: MIC not present..Invoking SSC

LWAPP Crypto Init (SSC): no certs in the SSC Private File

*Mar 1 00:00:06.435: Writing driver stats to flash:/ap_log_r0_1.log

*Mar 1 00:00:06.435: Unable to open connection

*Mar 1 00:00:06.435: Writing driver stats to flash:/ap_log_r0_2.log

*Mar 1 00:00:06.435: Unable to open connection

*Mar 1 00:00:06.443: Writing driver stats to flash:/ap_log_r1_1.log

*Mar 1 00:00:06.443: Unable to open connection

*Mar 1 00:00:06.443: Writing driver stats to flash:/ap_log_r1_2.log

*Mar 1 00:00:06.443: Unable to open connection

*Mar 1 00:00:06.447: mvl_radio_coredump: Last reset code: 37; hostmem ptr 00000000

*Mar 1 00:00:06.447: Cannot determine free space on flash:

*Mar 1 00:00:06.447: mvl_radio_coredump: Last reset code: 37; hostmem ptr 00000000

*Mar 1 00:00:06.447: Cannot determine free space on flash:

*Mar 1 00:00:06.447: Interface Dot11Radio0: not starting because stop-on-failure set

*Mar 1 00:00:06.447: Interface Dot11Radio1: not starting because stop-on-failure set

*Mar 1 00:00:07.399: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up%Default route without gateway, if not a point-to-point interface, may impact performance

nv_done: unable to open "flash:/private-multiple-fs.new"

*Mar 1 00:00:25.147: %LWAPP-3-CLIENTERRORLOG: flash:/configs directory creation failedFailed to open flash:config.txt

*Mar 1 00:00:25.171: Write of the Private File nvram:/lwapp_ap.cfg Failed on load, RCA needed

*Mar 1 00:00:25.175: Write of the Private File nvram:/lwapp_ap.cfg Failed on load, RCA needed

*Mar 1 00:00:35.191: Logging LWAPP message to 255.255.255.255.

*Mar 1 00:00:37.155: %LINK-6-UPDOWN: Interface BVI1, changed state to down

*Mar 1 00:00:38.155: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to down

*Mar 1 00:00:45.203: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!

Regards

Matin

Network Engineer

Saurav Lodh — Mon, 24 Jun 2013 08:16:20 GMT

Please refer to this dicussion, a similiar issue

https://supportforums.cisco.com/thread/2084693

topic Network Engineer in Wireless

Network Engineer

Network Engineer