topic 1131 AP12.4(3g)JA & 5508 V. 7.2.103 in Wireless

1131 AP12.4(3g)JA & 5508 V. 7.2.103

Daniel Ordóñez Flores — Sun, 04 Jul 2021 07:11:05 GMT

Hello Guys me Again I have some questions about this AP and it's IOS. I have some AP's 1131 and they have IOS 12.34(3g) JA I'm working with a 4402 WLC I'm going to change this WLC for one 5508 but this WLC has a different version software it has 7.2.103. My questions is I need to do any upgrade to my AP's IOS for join to the new WLC ?

I found a compatibility Matrix, in this document I guess i nedd to do some upgrade:

http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html

But I was checking this link

http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html

•

The WGB can be any autonomous access point that supports the workgroup bridge mode and is running Cisco IOS Release 12.4(3g)JA or later releases (on 32-MB access points) or Cisco IOS Release 12.3(8)JEB or later releases (on 16-MB access points). These access points include the AP1120, AP1121, AP1130, AP1231, AP1240, and AP1310. Cisco IOS releases prior to 12.4(3g)JA and 12.3(8)JEB are not supported.

This part of the document make me guess I don't have to do anything.

anyone knows if I really need to do an upgrade?

Re: 1131 AP12.4(3g)JA & 5508 V. 7.2.103

Stephen Rodriguez — Wed, 05 Jun 2013 15:51:18 GMT

If you want the AP to join and be controlled by the WLC, then you need to convert the AP to the CAPWAP/LWAPP image.

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html

If you just want the AP to act as a WGB on a WLAN controleld by the WLC then you don't need to do anything.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

1131 AP12.4(3g)JA & 5508 V. 7.2.103

Daniel Ordóñez Flores — Wed, 05 Jun 2013 15:58:14 GMT

Hello Stephen.

Thanks for your reply.

Right now I management this AP's trought my WLC 4402 so I guess the're working as Lwapp/Capwap

My questios could be... If I want to migrate or change this AP to my new 5508 WLC I need to upgrade the their IOS Version? or it just need to join easily?

1131 AP12.4(3g)JA & 5508 V. 7.2.103

Stephen Rodriguez — Wed, 05 Jun 2013 16:02:42 GMT

If the AP is already joined to a WLC, then you would just need to put the new WLC up,and tell the AP to join it.

Once the AP goes to join it will pull the image it needs to run to talk to that software version.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

1131 AP12.4(3g)JA & 5508 V. 7.2.103

Daniel Ordóñez Flores — Wed, 05 Jun 2013 16:10:20 GMT

so the IOS version don't need to be upgrade? I know the WLC send to AP his new code but still the AP has his own IOS Version, I can be sure the change will be easily ?

Thanks Again

1131 AP12.4(3g)JA & 5508 V. 7.2.103

Stephen Rodriguez — Wed, 05 Jun 2013 16:12:59 GMT

correct the WLC holds the image for the AP. The AP will get it's image from the WLC. you don't need to do it manually

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

1131 AP12.4(3g)JA & 5508 V. 7.2.103

Daniel Ordóñez Flores — Mon, 10 Jun 2013 20:15:02 GMT

So What about the Matrix compatibility? my AP doesn't have the minimun version to join the new WLC 5508 V 7.2.103.

is it a problem?

Re: 1131 AP12.4(3g)JA & 5508 V. 7.2.103

Scott Fella — Mon, 10 Jun 2013 20:21:09 GMT

The WLC supports the 1131 on your version of v7.2.103

Sent from Cisco Technical Support iPhone App

Re: 1131 AP12.4(3g)JA & 5508 V. 7.2.103

Daniel Ordóñez Flores — Mon, 10 Jun 2013 20:24:27 GMT

so I don't have to be concern about the matrix compatibility?

exist any document about the WLC 5508 support 1131 AP with 12.34(3g) JA IOS ?

1131 AP12.4(3g)JA & 5508 V. 7.2.103

Scott Fella — Mon, 10 Jun 2013 22:04:45 GMT

What you are looking for the the WLC code and what WLC image supports the AP model.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

1131 AP12.4(3g)JA & 5508 V. 7.2.103

Daniel Ordóñez Flores — Mon, 10 Jun 2013 22:35:11 GMT

Dear Scott.

Maybe is my english but still I don't get it and belive me I really sorry.

When I migrating My Ap's AIR-LAP1131AG-A-K9 with IOS 12.4(3g) that are managment for one WLC 4402 V 4.1.171 to 5508 WLC with 7.2.103 I don't have to get any problem?

Re: 1131 AP12.4(3g)JA & 5508 V. 7.2.103

Scott Fella — Mon, 10 Jun 2013 22:43:13 GMT

If your access point is autonomous right now, you would need to tftp a lightweight recovery image. That image will allow that ap to join your WLC. The AP will then download the correct image com the WLC. So post the show version from your AP.

Sent from Cisco Technical Support iPhone App

Re: 1131 AP12.4(3g)JA & 5508 V. 7.2.103

Scott Fella — Mon, 10 Jun 2013 22:50:34 GMT

Table 4 of the matrix is what you want to look at.

http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html#wp81600

Sent from Cisco Technical Support iPhone App

Re: 1131 AP12.4(3g)JA & 5508 V. 7.2.103

Daniel Ordóñez Flores — Mon, 10 Jun 2013 23:00:38 GMT

they're working as LWAPP right now but they've the version 12.4(3g).

I'm going to get the "show version"

Re: 1131 AP12.4(3g)JA & 5508 V. 7.2.103

Daniel Ordóñez Flores — Mon, 10 Jun 2013 23:02:44 GMT

So... I'm looking the incorrect table? I don't need a minimun version of IOS on my AP's to join at the WLC 5508 ?

Re: 1131 AP12.4(3g)JA & 5508 V. 7.2.103

Scott Fella — Mon, 10 Jun 2013 23:06:58 GMT

No you don't. Since your ap has already joined, your fine. Nothing else required.

Sent from Cisco Technical Support iPhone App

1131 AP12.4(3g)JA & 5508 V. 7.2.103

Leo Laohoo — Mon, 10 Jun 2013 23:17:27 GMT

I don't need a minimun version of IOS on my AP's to join at the WLC 5508 ?

The only "minimum" version is the RCV lightweight IOS to enable your AP to find and join a WLC.

Re: 1131 AP12.4(3g)JA & 5508 V. 7.2.103

Daniel Ordóñez Flores — Tue, 11 Jun 2013 03:10:50 GMT

Hello Scott.

There is the show version:

------------------ show version ------------------

Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(3g)JA, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Compiled Fri 27-Apr-07 01:56 by pwade

ROM: Bootstrap program is C1130 boot loader

BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (fc2)

CORCIR099-P2TI01 uptime is 1 week, 1 day, 59 minutes

System returned to ROM by reload

System image file is "flash:/c1130-k9w8-mx.124-3g.JA/c1130-k9w8-mx.124-3g.JA"

cisco AIR-AP1131AG-N-K9 (PowerPCElvis) processor (revision B0) with 24566K/8192K bytes of memory.

Processor board ID FTX1446N03Z

PowerPCElvis CPU at 262Mhz, revision number 0x0950

Last reset from reload

LWAPP image version 4.1.171.0

1 FastEthernet interface

2 802.11 Radio(s)

32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: 58:8D:09:EA:B4:C8

Part Number : 73-8962-14

PCA Assembly Number : 800-24818-13

PCA Revision Number : A0

PCB Serial Number : FOC14431NRC

Top Assembly Part Number : 800-29230-02

Top Assembly Serial Number : FTX1446N03Z

Top Revision Number : A0

Product/Model Number : AIR-AP1131AG-N-K9

Configuration register is 0xF

Re: 1131 AP12.4(3g)JA & 5508 V. 7.2.103

Scott Fella — Tue, 11 Jun 2013 03:16:52 GMT

Your fine. This is how you can tell if the image is autonomous or lightweight.

C1130-K9W8-M

K9W8 is capwap
K9W7 is autonomous

Sent from Cisco Technical Support iPhone App

Re: 1131 AP12.4(3g)JA & 5508 V. 7.2.103

Daniel Ordóñez Flores — Tue, 11 Jun 2013 03:26:37 GMT

thank you Scott