topic error message after 7.4.100.0 in Wireless

error message after 7.4.100.0

Marcus Johansson — Sun, 04 Jul 2021 06:35:29 GMT

Hi,

after upgrading to 7.4.100.0 im getting this error message when trying to apply changes on the wlan id.

"mDNS profiling cannot be enabled with flexconnect local switching"

if unselect mDNS snooping under (wlan id/advanced) i can apply the changes, but only temporary.

when im looking the next time, the tick box mDNS snooping is enabled again.

is this a bug or what?

Re: error message after 7.4.100.0

Scott Fella — Thu, 21 Feb 2013 14:24:02 GMT

You can't use mDNS if your SSID is going to be set for local switching. It will only work if you don't have local switching enabled. That's how mine is setup.

Sent from Cisco Technical Support iPhone App

Re: error message after 7.4.100.0

Marcus Johansson — Fri, 22 Feb 2013 06:56:14 GMT

Sure, i would like disable mDNS for that wlan.When i unselect mDNS snooping i can apply the settings.

However when i check the settings again, it's eneabled again, all by it self.

i don't understand why it's always enabled?

Re: error message after 7.4.100.0

Scott Fella — Fri, 22 Feb 2013 06:59:29 GMT

You need to uncheck FlexConnect local switching then hit apply, then go back and uncheck mDNS and hit apply.

Sent from Cisco Technical Support iPhone App

Re: error message after 7.4.100.0

Scott Fella — Fri, 22 Feb 2013 07:01:22 GMT

I have a 2504 that I do testing on and I don't have any issues with it at all. If you still have an issue, just make the changes I posted, save the config and reboot the WLC and try it again

Sent from Cisco Technical Support iPhone App

error message after 7.4.100.0

bill.higgins — Thu, 09 May 2013 15:34:15 GMT

Hi Scott -

We had the same mDNS/LocalSwitching issue with the 7.4.100 upgrade that Marcus Johansson had. Your solution worked perfectly for us.

Thank you!

Bill Higgins / Network Engineer / Expeditors International

Re: error message after 7.4.100.0

Scott Fella — Thu, 09 May 2013 15:43:22 GMT

Glad it helped:)

Sent from Cisco Technical Support iPhone App

Re: error message after 7.4.100.0

Abhishek Abhishek — Fri, 10 May 2013 22:14:23 GMT

Hello Marcus,

As per your query i can suggest you the following solution-

You need to disable mDNS for the WLAN.Un-check mDNS snooping and Flex Connect local switching.Finally you will be able to apply the settings.

Hope this will help