topic Re: config migration in Wireless

config migration

saquib.tandel — Sun, 04 Jul 2021 06:28:48 GMT

Hello

We got WLC 4402 running software 7.0.235 and would like to backup the configuration and restore on 5508. Is this doable?

Do we need to be on the same version as WLC 4402.

appreciate to ge t cisco document to follow the steps if the above is doable

5508 is new with no setup

thanks

Re: config migration

George Stefanick — Tue, 05 Feb 2013 05:58:18 GMT

I don't know that I would migrate this config. 4400 and 5508 different beast.

Take 10 minutes to rebuild the config .. Just rebuild it ..

Sent from Cisco Technical Support iPhone App

Re: config migration

Scott Fella — Tue, 05 Feb 2013 06:02:50 GMT

There is no documentation on this. Cisco will tell you to configure the new 5508 from scratch. You can do it, but its not supported.

It's best to have the WLC's on the same code first off. When you do a backup of the 4400, you will need to edit the config file and make changes to any of the IP address, host names etc. You will also have to delete the username entry and add it back in clear text so it's not encrypted or else you will not be able to login. MAKE SURE THAT ANY LINE YOU EDIT OR CREATE HAS A TRAILING SPACE!!!!!!

Like George mentioned, it might be safe to just build it from scratch, but I guess you can try restoring the config to the new WLC and see if it works for you. You can always factory default the new 5508 if you have to.

Sent from Cisco Technical Support iPhone App

Re: config migration

saquib.tandel — Tue, 05 Feb 2013 06:52:58 GMT

Hello

thank you gents ; Two question

Q1 - can i unencrypt the key for an SSID as it appears as *****

this option is WLC GUI

Wlan

click on Wlan ID

click security

click Layer2

WPA2 encryption checked AES and TKIP

Auth Key Mgmt PSK

PSK format ASCII

*****

Q2 - which is the most latest stable version for WLC 5508

Re: config migration

Scott Fella — Tue, 05 Feb 2013 11:53:07 GMT

Well you can leave that alone as if it doesn't work initially, you can always manually change the psk from the GUI.

As to the most stable code, well first off make sure the code matches when you restore the config from the 4400. Then you really can go with any of the latest version from any of the 7.x. Depending on what you have, I would probably go in this order:

7.2.x
7.0.x
7.4.x
7.3.x

This is my preference.

Sent from Cisco Technical Support iPhone App

config migration

saquib.tandel — Wed, 06 Feb 2013 08:43:39 GMT

Hello Scott

thanks for your feedback

From the CLI is there a way to see the different SSID password in unencrypted format

thanks

Re: config migration

Scott Fella — Wed, 06 Feb 2013 12:34:36 GMT

I don't believe so. But you don't need to decrypt it unless you don't know what it is? If you don't know what it is, you can always go to a windows 7 machine and view the preshared key.

You might try this, but it has to be perceived from the console.

http://www.my80211.com/home/2011/12/12/recover-wep-admin-guest-account-password-from-wlc.html

Sent from Cisco Technical Support iPhone App