topic RRM in Wireless

RRM

mdshelton1 — Sun, 04 Jul 2021 06:27:37 GMT

How can you confirm that RRM is on (running)
Thanks
MikeyD

Sent from Cisco Technical Support Android App

RRM

Stephen Rodriguez — Thu, 31 Jan 2013 16:56:00 GMT

go to Wireless > pick your netowrk > RRM > RF Grouping.

will show you what WLC are in the group, whom is the leader and the last run time

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

RRM

Scott Fella — Thu, 31 Jan 2013 16:56:56 GMT

You can look at the gui or issue this in the CLI

(WLC2504) >show advanced 802.11a channel

Leader Automatic Channel Assignment
Channel Assignment Mode........................ AUTO
Channel Update Interval........................ 24 Hours
Anchor time (Hour of the day).................. 0
Channel Update Contribution.................... SNI..
CleanAir Event-driven RRM option............... Enabled
CleanAir Event-driven RRM sensitivity.......... Medium
Channel Assignment Leader...................... WLC2504 (192.168.201.24)
Last Run....................................... 39225 seconds ago

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

Re:RRM

mdshelton1 — Sat, 02 Feb 2013 02:37:38 GMT

Is it the "Channel Assignment Mode........................ AUTO"
Auto meaning it is on and fix meaning it is manual not on?

Sent from Cisco Technical Support Android App

Re:RRM

Scott Fella — Sat, 02 Feb 2013 02:40:52 GMT

Auto means RRM is going to automatically make changes. Fixed is basically saying keep the power the same.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

Re:RRM

mdshelton1 — Sun, 03 Feb 2013 17:04:57 GMT

Thanks Scott

Sent from Cisco Technical Support Android App

Re: Re:RRM

Scott Fella — Sun, 03 Feb 2013 18:47:21 GMT

No problem.

Sent from Cisco Technical Support iPhone App