topic WiSM2 software upgrade in Wireless https://community.cisco.com/t5/wireless/wism2-software-upgrade/m-p/2048255#M211627 <HTML><HEAD></HEAD><BODY><P>Managed to solve the problem by shutting down one of the 2 WiSMs that I had in my chassis. Apparently the insufficient space error only occurs if I have both WiSMs enabled at the same time.</P></BODY></HTML> Tue, 25 Sep 2012 04:06:16 GMT tsadmin 2012-09-25T04:06:16Z WiSM2 software upgrade https://community.cisco.com/t5/wireless/wism2-software-upgrade/m-p/2048254#M211626 <P>Hi,</P><P></P><P>I'm trying to upload a new software image (~86mb) from my PC to the WiSM2 controller on a 6513 chassis.</P><P>Midway through the transfer, the transfer stopped and I got this error on the log:</P><P>*TransferTask: Jan 01 00:28:33.124: %UPDATE-3-FTP_TRANSFER_FAIL: updcode.c:4508 Error FTP file Transfer [ftp_get], &lt;28&gt;, No space left on device.</P><P></P><P>May I know how to access the memory on the wism to delete the old boot image? Thanks.</P> Sun, 04 Jul 2021 05:42:25 GMT https://community.cisco.com/t5/wireless/wism2-software-upgrade/m-p/2048254#M211626 tsadmin 2021-07-04T05:42:25Z WiSM2 software upgrade https://community.cisco.com/t5/wireless/wism2-software-upgrade/m-p/2048255#M211627 <HTML><HEAD></HEAD><BODY><P>Managed to solve the problem by shutting down one of the 2 WiSMs that I had in my chassis. Apparently the insufficient space error only occurs if I have both WiSMs enabled at the same time.</P></BODY></HTML> Tue, 25 Sep 2012 04:06:16 GMT https://community.cisco.com/t5/wireless/wism2-software-upgrade/m-p/2048255#M211627 tsadmin 2012-09-25T04:06:16Z