topic Re: Web GUI Timeout in Wireless

Web GUI Timeout

rochoa8aeg — Sun, 04 Jul 2021 04:21:32 GMT

The web GUI timeout on my AP seems to be too short, if I login and sit idle for about 60 seconds when I select a different menu item I need to type in my credentials again. At that point I notice that on the login menu it says to login for priv access level 1. How can I increase the login timeout so I dont need to keep typing in my credentials. I've already typed in the command no exec timeout but that only seems to help when im using the command line.

Re: Web GUI Timeout

Scott Fella — Wed, 11 Jan 2012 16:27:36 GMT

Edited... See other post:)

Thanks,

Scott Fella

Sent from my iPhone

Re: Web GUI Timeout

Scott Fella — Wed, 11 Jan 2012 16:28:51 GMT

Read your post wrong. You should be able to set the timeout from the management http/https section.

ip http timeout-policy

Sent from Cisco Technical Support iPhone App

Re: Web GUI Timeout

Scott Fella — Wed, 11 Jan 2012 16:36:06 GMT

The app is not showing the correct CLI command

ip http timeout-policy idle

Thanks,

Scott Fella

Sent from my iPhone

Re: Web GUI Timeout

Scott Fella — Wed, 11 Jan 2012 16:41:36 GMT

Here is a link to a previous post

https://supportforums.cisco.com/thread/2109694

Thanks,

Scott Fella

Sent from my iPhone

Re: Web GUI Timeout

rochoa8aeg — Wed, 11 Jan 2012 16:54:42 GMT

Sorry, I'm actually referring to an autonomous AP not a WLC.

Re: Web GUI Timeout

Scott Fella — Wed, 11 Jan 2012 16:57:06 GMT

I posted the autonomous commands also.

Thanks,

Scott Fella

Sent from my iPhone

Re: Web GUI Timeout

Scott Fella — Wed, 11 Jan 2012 16:59:07 GMT

ip http timeout-policy idle <1-600 sec> life <1-86400>

For your SSH timeouts, you would want to modify the following under your vty line configuration:

exec-timeout

Re: Web GUI Timeout

rochoa8aeg — Wed, 11 Jan 2012 17:06:37 GMT

Yes I did see that. What does the 'requests' mean because it requires me to type it in?

AP2(config)#ip http timeout-policy idle 600 life 6000

% Incomplete command.

AEGL-NASH-AP2(config)#ip http timeout-policy idle 600 life 6000 requests ?

<1-86400> Maximum number of requests allowed on a http server connection

Re: Web GUI Timeout

Scott Fella — Wed, 11 Jan 2012 17:13:06 GMT

How many connections do you want to allow a one time.

Thanks,

Scott Fella

Sent from my iPhone

Re: Web GUI Timeout

rochoa8aeg — Wed, 11 Jan 2012 17:21:04 GMT

Is this VTY sessions allowed? I would think the same as the sessions limit 15, no?

Re: Web GUI Timeout

Scott Fella — Wed, 11 Jan 2012 17:23:06 GMT

You can... Depends on how many users might need access. Some

Like to limit it to 5 or less.

Thanks,

Scott Fella

Sent from my iPhone

Re: Web GUI Timeout

rochoa8aeg — Wed, 11 Jan 2012 17:29:51 GMT

Great. So this is my command:

AEGL-NASH-AP2(config)#ip http timeout-policy idle 600 life 6000 requests 5

So I'm basically saying here that there is a policy on my AP that when I'm using the GUI and it's idle it will only remain idle for 600 seconds or 10 minutes, and only allow 5 simultaneous users at a time. Right?

Re: Web GUI Timeout

Scott Fella — Wed, 11 Jan 2012 17:33:36 GMT

Correct

Thanks,

Scott Fella

Sent from my iPhone